BimmerGeeks Pro K+DCAN cable

[BimmerGeeks!]

PRO BMW CABLES from BimmerGeeks.Net!

BimmerGeeks solely guarantees your cable works the first time, and every time. Whether your looking to use the basics of Inpa, Ncs, Ista or other popular softwares or whether your looking to flash those modules that they say you cant flash with a Kdcan, we've got a cable for your needs.


PRO-CABLE: $44.99

The K+DCAN cable that's proven to beat even the most expensive cables in speed, functionality & reliability. Modified in house resulting in a truly unique k+dcan cable.
Directly tested, approved & recommended by some of the top BMW tuning & development companies out there such as:

***MHD, Xhp, BimmerLabs, Twisted Tuning & Wedge Performance***

-Code, Flash & Diagnose all E-Chassis
-Diagnose F-Chassis
-Cuts Flash Times in HALF!
-Proven to flash modules other K+Dcans can't such as:
-M3/M5/M6 DME (MSS6X)
-E6x M5/M6 SMG (GDSMG3)
-E9x GM Auto (GM1912)
-Built in switch for double K-Line support (E46, E38, E39 etc)
-One Year Warranty



ENET-Cable -$19.99

-BimmerGeeks Enet Cables are pre-tested before shipping. Made from quality materials & built for durability. Guaranteed to work out of the packaging.

-Code, Flash & Diagnose all F/G/I-Chassis
-Pre-Tested on Esys & Ista before shipping
-One Year Warranty


Basic K+DCAN: $34.99

The basic version of the cables above with no switch and non-modified software...For DIY customers who only need the cable for their car or newer chassis(E90, E60, E89, E70, E65 etc...


**********

You can place orders at BimmerGeeks.net. We ship daily at 4pm, all orders place by 3pm(est) are shipped same day.
For those using our coding & diagnostic services, please wait until your cable arrives to request remote software install. This way we can remotely install the software & get your requested coding items done in one session

 

[doublespaces]

So is there a difference between this and the blaze cable I bought?

 

[BimmerGeeks!]

Nope, We've partnered with Twisted Tuning so your all set!

 

[Danksies]

Any reason for going with BimmerGeeks? Not the meaning behind the name lol, but all makes use OBD2 so why limit your yourself by being loosely associated with BMW's? I feel like search results for cables wouldn't advertise you guys that well unless you were either already established or paying for ads.

Your cables look good though. If mine ever goes out I'll keep ya in mind

 

[BimmerGeeks!]

We mainly assist with remote coding and flashing. It got to a point where it only made sense to sell the cables we needed customers to get to use our services.

Instead of offering the same old KDCAN cables everyone else does, we decided to offer something a little different.

 

[don detta]

Just got mine in today! Shipping was quick. I haven't had the chance to try it out but looks mint.

 

[Wburfield]

I just want to win the raffle.

 

[matreyia]

I can personally vouch for BimmerGeeks Cable. My old Amazon cable would be unstable and crash with MHD sometimes and almost all the time with xHP to the point where I could not even install xHP let alone flash stage 3.
I did not know there was such a difference in cables. When I finally got the BimmerGeeks cable, it was rock solid stable, super fast transmission rate. My xHP would crash at sector 2 about 20% and give me the dreaded "TCU not Supported" error... until I finally used the BimmerGeeks cable. Then it went 100% without a hitch and was half the time to install. 8 minutes instead of 20 minutes.

Highly recommended.

 

[Jeffman]

I got the same one from Twisted Tuning. MHD reflashes take 1 minute. They used to take 2 minutes on the old K+Dcan cable I have. XHP install was about 30 minutes on the new cable - but I had to really charge the battery to full because xHP wouldn't start if the battery voltage was below 12.x volts.

 

[TN8Shooter]

Great cable for the money. Customer service is outstanding!!!

 

[DKe90]

Hi im looking for a cable do run a MHD flash on my car. Is it possible to skip the INPA software installation ive tried everything to install it but its not working im looking for a plug and go type cord

 

[doublespaces]

You don't need to install INPA to use mhd. If you haven't bought a cable, but this one.

 

[matreyia]

Hi im looking for a cable do run a MHD flash on my car. Is it possible to skip the INPA software installation ive tried everything to install it but its not working im looking for a plug and go type cord

Save yourself the terrifying feelings of messing up a flahs when it gets stuck midway... get a BimmerGeeks cable. You are wasting time and money if you try to find cheaper amazon cables... ask me how many stupid cheap cables I went thru and cause nothing but problems.

 

[JuniorB]

Just got the cable, do I contact BG to load the software and programs to start running this, I'll like to run this on my laptop and tablet. Also have you helped with the xhp programming on the earlier e cars? Ty I'll be in touch.

 

[ddang06]

Got my cable the other day . Works as Acevertised . You should label the switch tho .

 

[doublespaces]

@BimmerGeeks!

 

[Twisted Tuning]

I have not received any tracking information for an order placed over 72 business hours ago. Sent multiple emails to no avail. No phone number listed on their webpage either.
No customer service at all up until this point

just for your sake, i would remove your entire address man.

 

[Treemurphy92]

just for your sake, i would remove your entire address man.

appreciate it!

 

[Itsbrokeagain]

So how do I get ahold of these guys? Looking for an email, I got a dead USB type C adaptor and the Bluetooth dongle is also dead. Stuck in the middle of trying to flash my truck with XHP, I have a tablet with a good adaptor that the app keeps crashing in (not to mention Protool) and my phone has a faulty type C adaptor. Stuck between a rock and a hard place

 

[Torgus]

@BimmerGeeks!

My USB type C adapter from BG failed. It got very flakey and would always disconnect if it was moved at all and it took forever to get the cable positions correctly so it would connect in the 1st place. I think I owned it for under a year. Not happy with the quality of the product. The regular ODB2 cable they offer works just fine and seems to be of good quality, just the USB C adapter piece is feels/looks cheap and is from my experience with it failing so fast under limited use.

Guess I should have paid $5 for the lifetime warranty but a cable should not fail...I mean it lives in my glovebox and gets used a few times a year to log and upload a new flash.

MHD WiFi flashing cannot come soon enough.