Twisted Tuning X-Drive Transfer Case Mount Inserts (Group Buy)

[Twisted Tuning]

You all asked, and we as always will deliver. This is just one of a few things we have coming down the pipes for all the XI people out looking to put power down and solidify their drivetrain.

The time has come to start removing all the slop from the XI drivetrain and start reducing the catastrophic failures when making big power!!!

#Twistedtuning #Twistedtuned #335xi #transfercase #mount #inserts #drivetrain #awd #spoolstreet n54 #n55

OK, purchase link is up. Group Buy introductory pricing is available until January 31st, 2018.

On that date or before. Manufacturing and shipment of orders will begin for everyone participating in the group buy. All orders will receive tracking information via email once orders are shipped. Week and a Half late. But happy New Year.

Intro Pricing: $270/kit

Purchase Link:
https://twistedtuning.com/collectio...uning-bmw-x-drive-transfer-case-mount-inserts

335xi TCase Mount Insert by Justin Whitted, on Flickr

 

[Bmwfixerguy1]

Very nice it looks like the transfer case mount tool.

Almost like you took the tool and had it made out of a poly! Very clever if that's the case.. pun intended lol

 

[Twisted Tuning]

Very nice it looks like the transfer case mount tool.

Almost like you took the tool and had it made out of a poly! Very clever if that's the case.. pun intended lol

didn't use nor look at any part of the tool actually when making this. honestly forget one even existed for this mount.

 

[Bmwfixerguy1]

That's wild because it's just what it looks like.. with out surprise though because it's basically gonna have to look like it to work

Good part though I've never seen anything for the all wheel drive cars!

 

[Mike335xi]

What is it going to be made from?

 

[Twisted Tuning]

What is it going to be made from?

Stage 1 poly
Stage 2 6061 or SS or Chromoly

 

[Sw4y1313]

Put me on the list, Justin! I hope its out before I return next year. It will go in with my turbo re-install.

 

[Twisted Tuning]

Put me on the list, Justin! I hope its out before I return next year. It will go in with my turbo re-install.

no doubt man. hows things over there?

 

[Sw4y1313]

no doubt man. hows things over there?

Going well, thanks. still getting settled in.

 

[Twisted Tuning]

g

Going well, thanks. still getting settled in.

good deal, be safe man

 

[Mike335xi]

When will these be ready and how much? Interested in the poly

 

[Twisted Tuning]

When will these be ready and how much? Interested in the poly

trying to have them ready for sale by Christmas. Have a few more small changes to make for them.

 

[Jeffman]

trying to have them ready for sale by Christmas. Have a few more small changes to make for them.

Stocking stuffers!

 

[mario65]

any update on this? thanks

 

[Twisted Tuning]

any update on this? thanks

Will probably start pre-order for the first run by the end of this week. Then will take about 1-2weeks for delivery

Made another small change the day before Christmas. So want to perform one last quick fit test before the public release

 

[Twisted Tuning]

Stage 1 poly
Stage 2 6061 or SS or Chromoly

And a change from this. As it just doesn't make sense to make two different ones. So it will be one type out of 6061 or SS depending on cost of this last modification. More than likely. Aluminum



Then I'll move on to finishing the front diff braces

 

[Twisted Tuning]

Few pics of the last version before the last changes I just mentioned

 

[doublespaces]

Being unfamiliar with the xi failures, does this help with the launches, front end wheel hop?

 

[Twisted Tuning]

Being unfamiliar with the xi failures, does this help with the launches, front end wheel hop?

This mount insert particularly with reduce transfer case and transmission movement at the center of the car. On the XI the actual mount is super soft. And offset to the passenger side of the drivtrain. So under torque the trans and tcase twist. This will reduce the twisting that happens in turn keeping the front driveshaft/t-case output from being at weird angles under torque.

People with a XI can probably attest to drivetrain clunking when quickly letting of the throttle in full or part throttle situations where the movement hasn't settled yet with the weight/torque transfer.

This is less apparent on the RWD models since the mounts are both at the bottom parallel to the twisting force.

Now, the front diff braces that I will be releasing will help with any wheel hop as it will lock the front diff in place. Pretty much just like the rear duff braces the RWD guys use.

 

[TwinTurboWAWD]

People with a XI can probably attest to drivetrain clunking when quickly letting of the throttle in full or part throttle situations where the movement hasn't settled yet with the weight/torque transfer.

I can attest to this.... you'll swear the bushing is destroyed, but the dealership found nothing wrong lol