Sharp Customs N54 Sheetmetal Intake group buy thread.

Sharp

Private
Nov 21, 2016
26
44
0
Tampa
Ok guys, we are ready to get the ball rolling on orders for the group buy. The price will be 540.00 shipped to your door and I would need you to Pm me or reply to this thread with an email to send you a paypal request for payment.

I have talked to the factory and they will reopen this coming Monday and will take 2 to 3 weeks to complete depending on how many orders we can get in. Then add a week or so to get everyone on board and then another week for shipping and we are looking at beginning to middle of March.

These will all come in the textured anodized black with all the hardware and gaskets that were shown on Steven's post here> https://bmw.spoolstreet.com/threads...ntake-manifold-testing-and-future-review.814/

upload_2017-2-4_1-12-16.png

upload_2017-2-4_1-8-21.png

Again, just post or PM me your email address and I will send a request.



so far i have:
MachineMade919 black
Sshec152 polished
redbullgotwings polished
Jburner82 black
Clintmemore black
Ezkillz polished
Yeezus335i Polished
screaminfast black
Jamesbuk 2 in Black
camberadam black
mirzaik black
frankenturbo black
onehotdroptop black
 
Last edited:
Feb 1, 2017
21
9
0
just want to make sure the picture posted isnt the version we are being sent correct? There were some new versions since that one was made.
 

doublespaces

Administrator
Oct 18, 2016
9,303
4,331
0
AZ
Ride
2009 E93 335i
just want to make sure the picture posted isnt the version we are being sent correct? There were some new versions since that one was made.

Pretty certain he will be sending you the revised manifold. This was just a photo he had off hand most likely.
 

Snelson3003

Sergeant
Nov 7, 2016
325
199
0
Denver
www.nelsonracingwheel.com
Ride
2010 BMW 135i
Guys i will be hitting the dyno this week to test on my new setup and show how the PI affects the overall performance on the N54. Last Dyno was 498whp @ 19psi on E50 fuel. This new one will be all out at 24psi on 100% E85 w/PI and the SC manifold. BE EXCITED.
 
  • Like
Reactions: Sshec152

Xshadows

Corporal
Nov 4, 2016
122
72
0
Sanford NC
Guys i will be hitting the dyno this week to test on my new setup and show how the PI affects the overall performance on the N54. Last Dyno was 498whp @ 19psi on E50 fuel. This new one will be all out at 24psi on 100% E85 w/PI and the SC manifold. BE EXCITED.

I'm just waiting for some results with the PI before I place my order. What injectors and controller are you using? What about fuel lines?
 

Snelson3003

Sergeant
Nov 7, 2016
325
199
0
Denver
www.nelsonracingwheel.com
Ride
2010 BMW 135i
Fuel line is a 6AN line that I bought in a 1 foot section and cut to size. Injectors are the FAST LS7 39lb units I got for $180 (all 6)

And as a BMS product fan boy I'm using their BMS PI controller which works incredibly well.
 

Payam@BMS

Sergeant
Oct 27, 2016
412
265
25
33
Injectors are the FAST LS7 39lb units I got for $180 (all 6)

And as a BMS product fan boy I'm using their BMS PI controller which works incredibly well.

Link to the injectors?

I personally love the BMS PI controller as well. It's so easy to use and dial in, and all the safety it provides you can't beat it for the price.
 

Snelson3003

Sergeant
Nov 7, 2016
325
199
0
Denver
www.nelsonracingwheel.com
Ride
2010 BMW 135i
Also guys, if you want a more robust setup that has very little "piecing together" you can always buy the EOS PI Fueling kit (NOT the manifold).

ECS sells the kit for cheap and is everything you will need including the Bosch EV14 52Lb/hr injectors. - i would have bought this if it was available when i started honestly.