Ad: New Vendor - DC Speed for Forgestar Wheel Sales

[MarisaDC-Speed]

Hey everyone!

I am a new vendor here from a small shop in OC, California. We are starting off small and specializing in Forgestar wheel sales currently. We have very competitive pricing and also offer ceramic coating services on new sets of wheels. Forgestar also has a rebate offer going on right now until October 11th! If you need a nice set of daily wheels or even a drag set up(those are going like hotcakes) send me a message and I can get you special Spoolstreet Forum pricing. Looking forward to helping fellow members out


-Marisa

 

[Xshadows]

Deep concave 9.5 rear and 8.5 front for a 1 series in an 18" wheel. Can't seem to find any or in the right offset for the F14's.

 

[Payam@BMS]

Deep concave 9.5 rear and 8.5 front for a 1 series in an 18" wheel. Can't seem to find any or in the right offset for the F14's.

The 1 series will be hard to find wheels for. If you know specs on what offset etc, she can check for you. There are wheels that are not listed on the site, so best is to ask/pm directly.

 

[Xshadows]

The 1 series will be hard to find wheels for. If you know specs on what offset etc, she can check for you. There are wheels that are not listed on the site, so best is to ask/pm directly.

Yeah, sounds like someone over at Forgestar needs to man up and get a proper wheel setup for us 1 series guys!

 

[Steven@ClarkPerformanceFab]

Last time I checked forgestar does make a wheel for the 1 series. I believe that its listed on the Mod Bargains site.

OP, can you do just two wheels or do you need to do sets of 4?

 

[Steven@ClarkPerformanceFab]

Just checked and there is a 135i on the modbargains site with a 17x8.5 et40 and 17x9.5 et60. Here is the picture from the site.

 

[Xshadows]

Just checked and there is a 135i on the modbargains site with a 17x8.5 et40 and 17x9.5 et60. Here is the picture from the site.
View attachment 5846

Yup, looks weird with 17's. Need 18's.

 

[Payam@BMS]

Yup, looks weird with 17's. Need 18's.

Shoot her an Email!

[email protected]

 

[Steven@ClarkPerformanceFab]

Yup, looks weird with 17's. Need 18's.

I need 17". I have 18" EC-7 now and they look amazing but a 17x9.5 that will fit our offset is great for fitting radials.

 

[JBarros]

Just checked and there is a 135i on the modbargains site with a 17x8.5 et40 and 17x9.5 et60. Here is the picture from the site.
View attachment 5846

Looks good

 

[doublespaces]

Hey everyone!

I am a new vendor here from a small shop in OC, California. We are starting off small and specializing in Forgestar wheel sales currently. We have very competitive pricing and also offer ceramic coating services on new sets of wheels. Forgestar also has a rebate offer going on right now until October 11th! If you need a nice set of daily wheels or even a drag set up(those are going like hotcakes) send me a message and I can get you special Spoolstreet Forum pricing. Looking forward to helping fellow members out


-Marisa

Is it possible to put SDC's on the rear without stretching the tires or having excessive camber on an E9X?

This is what I've found:

Recommended Fitment for BMW 335
Front 19×8.5 Semi Concave ET32
Option 1: Rear 19×10 Deep Concave ET38 – 265/30/19
Option 2: Rear 19×10 Super Deep concave ET28 – 265/30/19 (Requires Rolling Fenders for lowered cars)

I wonder if the Deep Concave can be ran in front, with the SDC in the rear?