So once I realized the dilemma of needing oil catch cans after installing the valve cover. Due to there being no cyclonic separator, as well as not being able to reuse the OEM PCV or CCV (Crank case vent hose) as the 2 ports (high/boost and low/vacuum) on the M18 VC are both just -10AN. I then...
So all of a sudden my car has started to pull pretty hard to the right during light to medium braking. I can even the braking out by pushing the pedal hard enough to "reset" the caliper back to normal operation. When I push hard enough, I feel a slight "pop" and after that braking is...
Hello everyone, i'm new on this forum, from Georgia🇬🇪.
I want to share my knowledge to everyone who is interested.
I'm starting project, which is very important for me, i'm spending a lot of time and also 💲💲 on it. English is my second language so please don't be strict.
It had some...
I made this post to hopefully help out another single turbo n54 owner looking to pass emissions.
Information on my car -
2007 335i N54
On3 single turbo kit
Manzo catback exhaust
E60 mix on a custom tune (jb4 + mhd bef)
I am in Colorado, typically for a 2007 they would do the test on the...
If this is the wrong area to post this, please correct me. I'm usually not one to post on the forums but this is an issue. I have been seeing a few horror stories of MMP products basically blowing up motors and the guys there are blaming it on other things with no fault of their own. I bought an...
Hello guys, nice to be here! I'm based in Eastern Europe.
For my next project car I'm planning to do a S85 V10 swap into an E92 M3 with the DCT gearbox. There seem to have been a few breakthroughs in the both S85 engine management and the DCT controlling, so this seems like a good time for the...
Un-boxed my Stage 3 Twin Disc Clutch AND my Upgraded Twin Turbos recently from GotTuned all the way in Poland. Very exited to try these out.
Clutch looks like something you might find out of a spaceship :tearsofjoy:
Figured I'd check out what the Euro market was up to since most build I know of...
I have been slacking getting around to posting on this forum, so let me give a quick synopsis of my N54 experience thus far.
Almost a year and a half ago I finally found the e92 335i I had been relentlessly searching for. It was in Ga (I live in Fl), but that didn't matter to me. 6spd MT black...
Hello ladies and gents,
I'll start off by introducing myself and my company to you all first and foremost. My name is Eric, I've created a brand and company called "Modify it" that caters to all of our BMW enthusiasts!
I've noticed the void in our community for quality carbon parts and great...
So I've been looking into a lot of different suspension upgrades lately and one of the things that caught my eye was the idea of doing a custom manual steering rack. Has anyone tried going this route or at least deleting the power steering? I know some people have gone the route of using an M3...
hello ....i have a 07 328xi coupe e92.... im about to do the avin usa android upgrade and i was wondering is there anything else on the market other than avinusa unit before i splurge and buy it....any help would be greatly apprieciated
Fuel-IT Stage 3 - Bucket/Pump assembly. No supporting hardware Upgraded to Stage 4. $300 + shipping SOLD
PI injectors, $20/ea + shipping. Bought a bunch of used injectors as spares before I upgraded to new 750cc.
DP fix (2 available). Both used, both for sale as I no longer require...
OS GIKEN ’Super Lock’ LSD Differential with the 335 A/T Gear set 3.46
e90 e91 e92 335 / 135 only.
Faster 0-60, more enjoyable to drive if you add this to a 6MT! Better 1/4 Mile Times too.
$2100 OBO fully assembled pumpkin, ready to install!
I have extra fluid that can be included.
I drive an 08 e92 and recently picked up a set of 436M wheels off an M235i. Do I need wheels spacers to fit these properly and if so what size? Wheel specs below:
Front Wheels: 8Jx18 ET34
Rear Wheels: 8.5Jx18 ET37
Front Wheels: 7.5Jx18 ET45
Rear Wheels: 8Jx18 ET52
We are new to the forum. We , Aeuroplug are based in Southern California. Our company specialize in OE Fiment / OE Quality BMW aftermarket Body kit and Carbon Fiber Accessories. We might be new to the forum but definitely not new to this industry. We have been in auto accessories...
I wasnt going to start a new thread but im having an issue, that i just can NOT figure out...
I have no power to my interior (E92). No gauges, Gauges, Guage Cluster screen, and there's a constant "relay clicking" noise coming from the JBE area every 5 seconds or so. And currently this will...
Hey guys, new here.
Have a 335i 2007 E92 and there's no boost at all. Vacuum lines are already checked, selenoids are working, diverter valves are working as well, we've changed wastegate actuators and flaps, but there's still no boost.
What else can we look into?
Backed by popular demand, we are releasing pricing on our billet valve cover. Please read the post all the way through.
We are a Canadian company, but we will be posting prices in USD on the forums as it's the biggest customer base.
Plugging of PCV oil drain ports is highly recomended to avoid...