Hey people, My name is Sascha, 25 years old, and I'm from Germany (Öhringen) and new to this forum and also new to this whole tuning thing 
I'm dailying a BMW E92 2006 335i N54 with the MHD stage 2+ mapping. I installed 200 cell Cats, Burger Motorsport Cone Filters, cheap aliexpress Chargepipe and BOV (I'm very happy with both, especially for about €30), NGK 9577 Spark plugs, cheap original sized Ebay Turbos (also quite happy with them, but I forgot to adjust the wastegates so now I run into slight overboost issues at about 180km/h) and I swapped almost all suspension parts with PU parts (I highly recommend doing this).
As you can see, right now I'm building my car as cheap as possible, since I'm studying mechanical engineering at the moment and don't really have the funds to buy the "good" parts. The only parts I don't cheap out on are tires, brakes and suspension parts. Right now, I deleted my back seat and constructing a rear half cage. I do everything myself and taught myself everything I know, and the next big thing I want to learn is how to tune my car myself.
I'm pretty good at working with SolidWorks (CAD Program) so if anybody needs CAD drawings I could provide them without problem.
I'm dailying a BMW E92 2006 335i N54 with the MHD stage 2+ mapping. I installed 200 cell Cats, Burger Motorsport Cone Filters, cheap aliexpress Chargepipe and BOV (I'm very happy with both, especially for about €30), NGK 9577 Spark plugs, cheap original sized Ebay Turbos (also quite happy with them, but I forgot to adjust the wastegates so now I run into slight overboost issues at about 180km/h) and I swapped almost all suspension parts with PU parts (I highly recommend doing this).
As you can see, right now I'm building my car as cheap as possible, since I'm studying mechanical engineering at the moment and don't really have the funds to buy the "good" parts. The only parts I don't cheap out on are tires, brakes and suspension parts. Right now, I deleted my back seat and constructing a rear half cage. I do everything myself and taught myself everything I know, and the next big thing I want to learn is how to tune my car myself.
I'm pretty good at working with SolidWorks (CAD Program) so if anybody needs CAD drawings I could provide them without problem.
Attachments
Last edited:
