Weistec W.4 S63 Turbo Upgrade

doublespaces

Administrator
Oct 18, 2016
9,303
4,331
0
AZ
Ride
2009 E93 335i
Weistec has released a bolt on turbo upgrade for the M5 S63 starting at $11,999.99 and it looks real good, premium quality. The turbo options are:

GTX3071R Gen II
GTX3076R Gen II (+$1000)
GTX3576R Gen II (+$2000)
GTX3582R Gen II (+$2300)

You'll get charge and downpipes to make it entirely a bolt-on affair, no core charges. There is a WMI option for another $1000 for the complete system, and an anti-surge valve for $600.

Key Features:

  • Choice of Garrett Gen 2 GTX3071R, GTX3076R, GTX3576R, or GTX3582R Turbos
  • .75 A/R Turbine Housing
  • .70 A/R Compressor Cover
  • No core charge / exchange
  • Ball Bearing Turbochargers
  • High flowing Weistec Stainless Steel turbine housings
  • Weistec Turbo Intake Tubes and Charge Pipes
  • Weistec 304SS Downpipes (OEM style downpipes are incompatible)
  • All OEM heat shields are retained
  • 1000HP to 1700HP (Engine Power) Capable depending on turbo selection and with supporting modifications
  • Retains factory wastegate actuators
  • Bolt in Installation
  • Stainless Braided Oil and Coolant Lines
  • CNC Machined Anodized Coolant and Oil Fittings
  • Custom Tuning Required

http://weistec.com/all/bmw/5-series/m5/2014-2017-f10-s63tu/turbochargers/s63-w-4-turbo-system.html

s63tu_w4_1_6.jpg
s63tu_w4_2_6.jpg
s63tu_w4_3_5.jpg
s63tu_w4_4_4.jpg
s63tu_w4_5_5.jpg
s63tu_w4_6_5.jpg
s63tu_w4_7_4.jpg
s63tu_w4_8_6.jpg
s63tu_w4_9_4.jpg
s63tu_w4_10_3.jpg
s63tu_w4_11_2.jpg
s63tu_w4_12_2.jpg
s63tu_w4_13_2.jpg
s63tu_w4_14_2.jpg
s63tu_w4_15.jpg
s63tu_w4_16.jpg
water_meth_tank_1_6.jpg
wmi_4_6.jpg
meth_spray_1.jpg
 

Twisted Tuning

Lieutenant
Platinum Vendor
Oct 25, 2016
974
903
0
New York
www.twistedtuning.com
Ride
N54 and N55 Cars
Sheesh.... @weistec

This kit just made me feel some kind of way in my center region. Haha. But, no, seriously. This kit looks phenomenal.

However, I do have one question in regards to the Meth injection setup. This photo.....

water_meth_tank_1_6.jpg


The position of the Meth pump. Was it positioned the way simply for aesthetics for the product shoot?

These types of pumps have been known to cavitate and not pump properly if the tank feed is below the pump inlet. Unless you guys have a pump inside the tank itself (which also has a side effect by bumping head pressure it increases the Meth pump outlet pressure) feeding the Meth pump. I would flip the pump upside down and at least have the tank outlet and pump inlet level with each other or even better the pump inlet a bit lower.

Just asking. Great kit either way.