Rear Diffusors

The Convert

Captain
Jun 4, 2017
1,487
1,052
0
Ride
335
Looking to get a rear diffusor for the msport rear bumper I purchased. I like simple and have an AE quad exhaust. I'm looking at the one pictured below. Anyone have any experience with Ikon motorsports and their fitment?

IMG_1348.PNG
 

fmorelli

Lieutenant General
Staff member
Aug 11, 2017
3,748
3,592
0
57
Virginia
Ride
E89 Z4 35i, F10 535d
Yes. Done two of them ... my E89 Z4 went to quad (Ikon) and my F10 535d. Let me start by saying the way BMW installed this piece of trim is as ghetto as how they install the intercoolers. It's a bendy tab. Easy to break, so do it with care. Ikon, like most folks, is reselling stuff coming out of a couple places in China (it's all the same crap, almost). I've had mine for two years, and looks good so quality of finish is good.

On the Z4, one issue I had was how the molds were made. Clearly they took the factory piece off the car and made a mold from it. Well the factory piece is flex plastic. Carbon fiber doesn't flex. So the mold for the underside connection didn't quite work and I cut it off the back side. In the photos, on the Z4 the back of the cover would have connected where those two tabs are, and cover the yellow painted area. The CF is stiff so no need. I just sprayed the yellow with black paint and no one knows the difference. No idea how it is on the 1 or 3 series.

Good luck!

Filippo

IMG_20160912_110944.jpg
imagejpeg_0 (1).jpg
imagejpeg_0 (2).jpg
WhatsApp Image 2017-09-03 at 7.45.54 PM.jpg
 

The Convert

Captain
Jun 4, 2017
1,487
1,052
0
Ride
335
Thanks. That's good insight. Probably going to pull the trigger on one once I figure out what's causing my current issues.