Platinum Racing Products New N54 GTR Coil kit for 335I

[DAT335]

Please note this is a post from SIMPLY TUNING - (101DUCK) As promised, great things take time. This is the PRP N54 coil kit about to be put through it's paces. Will take detailed fitting photos and if the racetracks were open id go send a mid9 for the boys. Guess I'll just do some dragy logs in mexico. Register your interest here. Shown is a nice subtle grey anodised bracket. But the PRP colour catalogue can cater to even the worst of tastes. Quality is second to none and 100% australian product. Platinum Racing Products Simply Tuning #ohhrly #shinycoilkit

Platinum Racing Products - High Quality Billet Automotive Products

Platinum Racing Products Specialises in High Grade Billet and Electronic Performance Kits for the Not So Average Street or Race Car.

platinumracingproducts.com

 

[Milan]

Can’t get to the FB page but I’m in for some more information. What does a GTR make on factory coils?

 

[ShocknAwe]

Do they have a real website? I'd rather eat cheese off a hobo than use Facebook and that post you made was totally devoid of any real info.

 

[DAT335]

 

[DAT335]

Do they have a real website? I'd rather eat cheese off a hobo than use Facebook and that post you made was totally devoid of any real info.

Here you go : https://platinumracingproducts.com/

 

[rev210]

Nice. These guys make killer gear for GTR RB motors.

 

[Milan]

Ah I know who these guys are now. They GTR coil swap everything. What about the harness? Same approach as BL?

 

[Traf]

Oh its finally out, damn nice...

 

[ShocknAwe]

Thanks for updating the thread OP!

 

[tisdrew]

Can’t get to the FB page but I’m in for some more information. What does a GTR make on factory coils?

There are 1000+ awhp GTRs on the factory coils.

I have the PRP ignition setup for my SR20, cool to see them coming over to the N54!

 

[rev210]

Ah I know who these guys are now. They GTR coil swap everything. What about the harness? Same approach as BL?

They engineer everything well. So the boots, brackets and harness are all high quality and fit, superior to BL but probably more costly too.

 

[Milan]

ez

They engineer everything well. So the boots, brackets and harness are all high quality and fit, superior to BL but probably more costly too.

So do we know when they will be available to purchase?

 

[9krpmrx8]

Any reason these would not work on an N55?

 

[mikeseli]

They engineer everything well. So the boots, brackets and harness are all high quality and fit, superior to BL but probably more costly too.

For sure $1000+ for the kit.

 

[Chris@VargasTurboTech]

We are also working with PRP on these kits. We are buying a couple of early kits to run on our cars shortly. Retail we are told is under $1000. We will be using this kit, and our Adaptronic to take Spark duties away from the Factory DME so we have complete stand-alone control for the Sequential spark cut, 2-step, anti-lag, etc. Our Factory ECU is doing less, and less these days.

 

[DAT335]

Anyway guys please leave your crappy comments between each other outside and stop trying to highjack my thread with this childish crap. This will be awesome and I believe it will be roughly $1500aud but don't quote me on it. People will whinge that its to expensive but thats what you got to pay if you want quality parts. If anyone wants more info they should check there page out or the;r FB as they have alot of great info.

 

[ShocknAwe]

Anyway guys please leave your crappy comments between each other outside and stop trying to highjack my thread with this childish crap. This will be awesome and I believe it will be roughly $1500aud but don't quote me on it. People will whinge that its to expensive but thats what you got to pay if you want quality parts. If anyone wants more info they should check there page out or the;r FB as they have alot of great info.

Wait. 101duck. Why do I know that name. I'm drawing a blank.

 

[fmorelli]

Wait. 101duck. Why do I know that name. I'm drawing a blank.

https://bmw.spoolstreet.com/threads/9-second-club-n54.3672/#post-49254 ... this might help jog your memory.

Filippo

 

[fmorelli]

If anyone wants more info they should check there page out or the;r FB as they have alot of great info.

First thanks for posting this and thanks for the photos. I hit the FB link you provided and it says content is not available. I went to the URL you provided, which hits their home page. I could not find the product info, which sort of makes sense if it is not yet released (?) ... any suggestions on where to actually get info?

I'm mostly wondering if the wiring harness is not China wire, connectors from Home Depot, etc as the BL kit was. If we are talking circa $1k USD, I suspect it would be race car grade wiring loom, connectors, etc?

Again thanks for posting this up!

Filippo

 

[DAT335]

Sorry the FB link is part of our Aussie forum so it won't work unless your a member. With a kit built by these guys I highly doubt it will be some sort of cheap china crap. You can see the loom and connectors above in the photos. Obviously once I see more photos I will upload.