Good to see real world results on vtt , hesitant on their products at timesMine slipped at 95k miles with MMP stage 3 at 18.5psi and e50, so around 500whp maybe. Got the vtt spline lock and the cars been fine for the past 60k miles.
Very true, thinking it wouldnt be a bad investmentTheres guys like that slip at 500 wheel and guys that run 750 wheel and never have issues man.
Honestly buying and having a crank hub fix installed is probably the same price as an n54. I personally will only do mine if I build the motor and have a significant amount of money invested in the motor.Very true, thinking it wouldnt be a bad investment
yea motor is built, closed deck piston rods, but i just heard its not as common as s55 so why i just wanted other peoples opinons at these power levelsHonestly buying and having a crank hub fix installed is probably the same price as an n54. I personally will only do mine if I build the motor and have a significant amount of money invested in the motor.
Im going to buy either vtt or this company misfire racing which looks really goodPrices in hubs have go down... new one on the market signifaclly cheaper. Worth checking out.
Maximum PSI is the only one that makes a true keyed solution that I’m aware of. If you’re gonna do it, do it right. My opinion anyway.Im going to buy either vtt or this company misfire racing which looks really good
Are those 2 good choices?
Max psi discontinued but ill ask a few people I kno thats close to them and see what they sayMaximum PSI is the only one that makes a true keyed solution that I’m aware of. If you’re gonna do it, do it right. My opinion anyway.
Max psi discontinued but ill ask a few people I kno thats close to them and see what they say
Thank you
Max psi discontinued but ill ask a few people I kno thats close to them and see what they say
Thank you
There is the potential that only one person “could” make them. Totally depends on the design, material, and the drawing requirements. The two parts could “look” identical and be completely different just because of a heat treat, or shot peen operation.Ppl act like is rocket science
People act like is rocket science and only one manufacturer can make it right . Vtt had an issued with first batch apparently they have new version and the misfire racing is a copy of max psi but a one piece which I like but haven't heard any reviews. He doesnt make them some other engineer did apparently.
Agree to disagree.... I'm sure there are plenty of places in the US that can make that crank hub the right way. Nothing proprietary about it or specialThere is the potential that only one person “could” make them. Totally depends on the design, material, and the drawing requirements. The two parts could “look” identical and be completely different just because of a heat treat, or shot peen operation.
You guys both make valid points if indont hear anything about max psi I will most likely go with misfire racing hub ,since it seems its the closet thing to itAgree to disagree.... I'm sure there are plenty of places in the US that can make that crank hub the right way. Nothing proprietary about it or special
Anyone with the right equipment can make anything. That’s only half of it. The manufacturers only have to meet the print requirements. So, the engineering/design become critical. I’m sure there’s a lot more involved in properly designing these hubs than most would think. Whether or not misfire, max psi have the engineering chops for it is certainly a fair question, but they seem to have the most capable looking design. I can’t, however, say that it is up to snuff or not though.Agree to disagree.... I'm sure there are plenty of places in the US that can make that crank hub the right way. Nothing proprietary about it or special
Misfire got the design from maxpsi and undersold them, putting them out of business on the n54 line. Thats the way i understood it. So, it should be good to go.I've 99% likely spun my hub running RB Next gens on E85 and about 580 rwhp (Australian dyno). Is the misfire racing hub ok? Anyone have one fitted? i see them for sale on eBay. Just wondering if they are strong. There's so many horror stories of these hub fixes.
Misfire got the design from maxpsi and undersold them, putting them out of business on the n54 line. Thats the way i understood it. So, it should be good to go.