335i

Hi everyone, I'm new on here but have been on bimmerpost since 2010. Intercooler is in great shape please PM me with any questions. Price: $400 shipped to the 48 states...

Whats up guys, first time posting here. I have been on spool street for a short while, have never posted but I read up on n54 posts and n54 build posts to learn about the platform. I have a 2008 E90 335i, its the first car i've bought on my own. (thanks to my e46 323i lol and a small family...

I’m looking for some insight. I recently developed a cylinder 6 and 5 misfire. Cylinder 6 was intermittent under load and cylinder 5 started misfiring intermittently as well but eventually became a constant misfire (Even at idle). I just started running full e85 after installing a double shotgun...

Fuel-IT Stage 3 - Bucket/Pump assembly. No supporting hardware Upgraded to Stage 4. $300 + shipping SOLD PI injectors, $20/ea + shipping. Bought a bunch of used injectors as spares before I upgraded to new 750cc. DP fix (2 available). Both used, both for sale as I no longer require...

Anyone who needs to install the rear axles to the hub - I finally found the tool that fits the 335i e9x series rear axles that have 27x1.5 thread. You will need this tool to safely pull the axles back completely into the splines on the inside of the hub. BMW, Baum sells for hundreds of dollars...

I wasnt going to start a new thread but im having an issue, that i just can NOT figure out... I have no power to my interior (E92). No gauges, Gauges, Guage Cluster screen, and there's a constant "relay clicking" noise coming from the JBE area every 5 seconds or so. And currently this will...

Hey guys, new here. Have a 335i 2007 E92 and there's no boost at all. Vacuum lines are already checked, selenoids are working, diverter valves are working as well, we've changed wastegate actuators and flaps, but there's still no boost. What else can we look into? Best regards

----------BimmerGeeks Cable Review ------- If you are doing any flashing or computer related stuff to your car via the obd port, then do yourself a favor and get a BimmerGeeks cable. I was using an older Amazon bought cable that did the job most of the time - very slow speeds and unstable. I...

Hey guys, so i wasnt to sure if this was normal or not, but everytime i start up my n54 135i (Bone stock atm), i get this lound raspy rattle in my exhaust. Only lasts for about a minuite or two until engine warms up, then its completely gone. To add more confusion to this all, if during the...

Hey guys I just installed the Precision Ignition upgrade on my car. I'm super happy with how the car feels now. I was getting crazy misfires before and somewhat of a rough idle but it runs mint now! I'm also working with EMP tuning so I can get the most power out of it. I made a DIY with some...

Backed by popular demand, we are releasing pricing on our billet valve cover. Please read the post all the way through. We are a Canadian company, but we will be posting prices in USD on the forums as it's the biggest customer base. Plugging of PCV oil drain ports is highly recomended to avoid...

Hey guys, Here is some dyno results and 1/4 mile numbers for F-series N55 Pure Stage 2 with different mods and fuel set up, Enjoy -1St F3X N55 335i build by EAS in OC -Stock flash And Stock fuel system Automatic transmission (8Speed) Mods: -E30 Fuel mix (91 oct with 3 gallons of E85)...

New videos is finally up, it's a long one but it covers the entire install. Car is running mint, next couple vids will be doing the jb4 firmware/backend flash and fuel pump install. Hope you all enjoy!

Hey guys, if anyone is interested in doing a clutch install I made a DIY video on YouTube. I covered installing a spec stage 3+ clutch, mfactory single mass flywheel and a bms short throw shifter. I made the video as informative as possible so I can help out as many people as I can! I will...

Hey guys if anyone is interested I'm going to be documenting my single turbo install on YouTube. If you subscribe to my channel "Budget Bimmers" I'll be uploading the series within the next few weeks. I'm also going to be installing a spec stage 3+ clutch with an mfactory single mass flywheel...

Hey guys. I am doing this write up after the install. I was getting tired of the wooden trim look on my 335. I saw some other forums where people decided to vinyl wrap their trim. This was my first time vinyl wrapping and thought I could make it turn out nice if I took my time. I decided to go...

I told you guys it runs... hopefully we can finish the mechanical stuff Thursday and set a date for the dyno. Meanwhile searching for Machine shop partners that want to have their name behind this build!

Well hello "SPOOLSTREET" I want to first shout out to @doublespaces for pulling me over here. I will try to get some more traction over here in a few other communities to follow as well, ANYHOW... Name and everything is in my Bio so I will skip that. I wont start back in July of 2015 when the...

Had the pleasure of meeting up with a new client today and his beautiful 07 335i coupe. The attention to detail on this car was nothing short of great. We have been talking over the last couple weeks while his car was having some upgrades done over at ZNM Performance out of NJ. Anyway, some...