Upgraded Turbo - Mods ?

[Subwoofer]

Currently FBO.
Just wondering whether I need to do anything else for my new 17T install, apart from the Walboro 450 and N20 map sensor.

I am not currently planning on pushing past 20 PSI, but not sure if I should have another supporting mod. I don’t believe I need PI, until I really want to push it, and at the time I’ll do stage 3 LPFP, along with it.

Thanks

 

[RNM]

Boost leak test, dual catch cans, check oil pan gasket for leaks, inspect rod bearings for wear and have fun!

 

[Subwoofer]

Boost leak test, dual catch cans, check oil pan gasket for leaks, inspect rod bearings for wear and have fun!

Haha. My current stock turbos, every time I pull it shadows a 30FF, the wastegates are destroyed. No vacuum leaks as I checked. Catch cans is definitely my next purchase, and I was going to change the oil pan gasket regardless anyways, forgot to say.

 

[langsbr]

RB PCV, hot side inlets, outlets, Race intercooler.

 

[derekgates]

Valve cover gasket is always great to do... If you go with catch cans and no internal PCV, then I would suggest plugging the head.

Regular maintenance is always fantastic, to ease the mind. I recently did my power steering fluid/reservoir, brake, DCT fluid/filter change, oil.... Car feels much happier and I am not worried about those pieces when I am pushing the car.

 

[Subwoofer]

Valve cover gasket is always great to do... If you go with catch cans and no internal PCV, then I would suggest plugging the head.

Regular maintenance is always fantastic, to ease the mind. I recently did my power steering fluid/reservoir, brake, DCT fluid/filter change, oil.... Car feels much happier and I am not worried about those pieces when I am pushing the car.

I’m going to try a catch can. When I install the turbos. I actually am going to clean intake valves, because I have to take the manifold off to change the oil filter housing gasket, so may as well kill 7 birds with 1 stone and many hours of labour

 

[derekgates]

I’m going to try a catch can. When I install the turbos. I actually am going to clean intake valves, because I have to take the manifold off to change the oil filter housing gasket, so may as well kill 7 birds with 1 stone and many hours of labour

This is the danger of "while I am in there".

 

[Subwoofer]

This is the danger of "while I am in there".

Haha, very true. To be honest just, those things. Don’t have anything else planned, for now oh and a ZF service soon.