Ad: Revshift N54 Motor Mounts

[Revshift]

The time has finally arrived!!

Revshift Performance Engineering is proud to announce the First Modular Street/Race N54 Motor Mounts for the 335 and 135!!

We have 35 sets of Limited Edition N54 e9x e8x Motor Mounts ready for Pre-Order!!

They are available in Race 95a Green Or Street 80a Black Poly.

Price for this pre-order group buy will be:
$349 shipped within the continental US.

Act now and for only $49 more, at the time of pre-order you get a set 95a and set of 80a bushings!! Ready to rip Street or Race.

Only 45 minutes to swap in your 95a bushings for weekend warrior racing or run the more OE feel 80a bushings for daily driving.

We couldn’t be more proud of how well these turned out. And even more, how well they perform. Don’t wait!! Only 35 slots!!

What’s included:
(2) Billet CNC Motor Mounts
(2) Poly Inserts (95a or 80a)
(1) Hot-Side Heat Blanket
(1) Hardware Pack

* $49 adds the other poly inserts to your order!!

What else? We have Trans Mounts Upgrades available now as well in 95a or 80a for $45!!

There’s more!! The first 35 orders gets a merch package. But Shhhh! It’s a surprise.

All spots available until paid. So please PM.

Payments Via PayPal: [email protected]

All mounts ship within 14 days of payment.

First comment below will update the number of spots left as they fill up and are paid. Thanks!!

 

[Erichale77]

Hope these perform better than your guibos

 

[Revshift]

Hope these perform better than your guibos

Our race guibos perform pretty well on race cars.

These motor mounts are phenomenal.

 

[fmorelli]

What's NVH like for the poly80 vs stock? This seems to be the $42 question for most people that are not running fully caged race cars.

Filippo

 

[Revshift]

What's NVH like for the poly80 vs stock? This seems to be the $42 question for most people that are not running fully caged race cars.

Filippo

Nvh is barely increased over the oem mounts. We just got done testing them in a 135i and they feel great. Back to back comparison you can tell a slight difference in nvh at idle. But if I were to get into a car with these 80a mounts thinking it was bone stock I wouldn’t think otherwise when I started it and drove it. From what I have heard about the other mounts out there and their nvh I would say these blow them out of the water. They are very smooth and they keep the motor perfectly still. I have a video of the engine revving and it doesn’t shake one bit. It’s amazing.

 

[doublespaces]

I'm a weird case, I only need a single mount for the driver side since the ADE single turbo kit comes with a dedicated motor mount. What would it cost for me to get just one cnc mount and an 80A insert?

 

[Revshift]

I'm a weird case, I only need a single mount for the driver side since the ADE single turbo kit comes with a dedicated motor mount. What would it cost for me to get just one cnc mount and an 80A insert?

We can’t sell them individually, sorry. I would not recommend running mismatched motor mounts though. Give our set a try, I don’t think you’ll be disappointed one bit.

 

[doublespaces]

We can’t sell them individually, sorry. I would not recommend running mismatched motor mounts though. Give our set a try, I don’t think you’ll be disappointed one bit.

Then you're going to have to make me one like this:

 

[Revshift]

Then you're going to have to make me one like this:

The oem bracket is nice. Part number 22116772154. There is probably a reason why that wont work but at least I tried.

 

[The Convert]

The oem bracket is nice. Part number 22116772154. There is probably a reason why that wont work but at least I tried.

You should really invest some time into learning about this platform and what's already available if you're going to market to us on here. Just sayin'

 

[Revshift]

You should really invest some time into learning about this platform and what's already available if you're going to market to us on here. Just sayin'

Considering we have a 135i, two 335i's, and an e92 M3 in the shop for r&d, I think we have invested quite a bit into it. Thanks though.

 

[doublespaces]

You should really invest some time into learning about this platform and what's already available if you're going to market to us on here. Just sayin'

What other modular motor mounts are there?

 

[Erichale77]

My blackforest stage 2 mounts are fkn awesome. Turners look identical design

 

[Ajbecerra]

Like the fact they have a blanket and swap ability of the bushings. Will hang tight for reviews though

 

[fmorelli]

The time has finally arrived!!
We couldn’t be more proud of how well these turned out. And even more, how well they perform. Don’t wait!! Only 35 slots!!

There’s more!! The first 35 orders gets a merch package. But Shhhh! It’s a surprise.

All spots available until paid. So please PM.

Nvh is barely increased over the oem mounts. We just got done testing them in a 135i and they feel great. Back to back comparison you can tell a slight difference in nvh at idle. But if I were to get into a car with these 80a mounts thinking it was bone stock I wouldn’t think otherwise when I started it and drove it.

Stay tuned or don’t. REVSHIFT is here to stay.

Guys, let's give them a chance to show us what they can do

Ok guys, I'm going to put my money where my mouth is. I paypal'd $349 to your account. Look forward to getting the 80a set. Glad to hear they are nearly OE NVH.

Once I've had seat time with them, I will post the install and reviews on my build thread.

Filippo

 

[blisstik]

@Revshift are the mounts interchangeable for each side? I may half it with @doublespaces as we both have one solid mount on one side

Also how does the 335iS mount compare to the 80s?

 

[Chris@VargasTurboTech]

We (Tony) sent you guys a PM offering to test the motor mounts on the 900+ whp car that's running ADE's currently (with a solidly mounted sequential transmission), but never heard back from you guys -did that get lost in the shuffle? It would be a good extreme use test bed -shoot me an email if you're up for it. We're still game.

Thanks,
Chris

 

[TwinTurboWAWD]

Nobody mentioned Turners motor mounts. They can be interchanged between two selections 60a and 80a

As for Revshift I appreciate that y'all give us another option to choose from and that y'all are continuing to increase products for the platform.

 

[LoBoost]

Ordered a set of motor and transmission mounts!

 

[fmorelli]

Ok guys, I'm going to put my money where my mouth is. I paypal'd $349 to your account. Look forward to getting the 80a set. Glad to hear they are nearly OE NVH.

Once I've had seat time with them, I will post the install and reviews on my build thread.

Filippo

My motor mounts arrive today. Ordered 4/27 and arrived 5/6 priority mail ... quick. It will be a few weeks before the car is back up on the lift and I can install. So it will be a while before I post more.

On first blush everything looks nice and first rate. Appreciate the Made in USA sticker. My guitars, made with all American products, get the same treatment.

Filippo