E8X Quad exhaust with performance???

[AWCR1MC]

Relocated my charcoal canister behind the rear crossmember and have 3" dp to 3.5" mid and back to 2.5" quad exit. Passes through a vibrant resonator, secondary cat, and MadDad Whisper muffler. Drone pipe and cat also pictured which were added later after my N53/Hydra build.

This is 1M tip spacing.

I’m currently in the process of deleting my battery tray right now, and trying to figure out how to move the lines for the charcoal canister over. Do you have anymore pics of how things are setup with the canister?

 

[ShocknAwe]

I’m currently in the process of deleting my battery tray right now, and trying to figure out how to move the lines for the charcoal canister over. Do you have anymore pics of how things are setup with the canister?

I'll try to take some pics this afternoon. I'm still in the process of cleaning up some rust that set in after I drove through salt water with our last hurricane and it sat for days so be warned won't be pretty.

 

[AWCR1MC]

I'll try to take some pics this afternoon. I'm still in the process of cleaning up some rust that set in after I drove through salt water with our last hurricane and it sat for days so be warned won't be pretty.

Did you ever get a chance to take some pictures? Going to try and tackle it this weekend. I've attached the charcoal canister to the body by using some nutserts. Just wanting to try and figure out how to get the lines modified to shift over, and then I'll have to extend the battery cables.

 

[ShocknAwe]

God I'm such a scrub. Will take photos for you from home tonight. If I don't please message me. Sorry bud.

 

[AWCR1MC]

God I'm such a scrub. Will take photos for you from home tonight. If I don't please message me. Sorry bud.

Lol no worries, I destroyed cylinder 4 so I’ve been lagging on my end. I’ll shoot you a message now.

 

[ShocknAwe]

Lol no worries, I destroyed cylinder 4 so I’ve been lagging on my end. I’ll shoot you a message now.

Bolted to the subframe.

I need a new diff lockdown.