Newbie here also with my 440i

[Willmo619]

Hello all, just hoping to post some logs and get anyones feedback on what they see. Pretty new to this so I want to make sure everything is ok.

 

[SlowE93]

Nobody cares...









































I mean, Welcome.
Forgive my associates and their rudeness for skipping over you.

 

[Willmo619]

i see that, but it’s all good. Everyone has lives, busy times ig

 

[SLOWESTN54]

i see that, but it’s all good. Everyone has lives, busy times ig

Were just jealous of the B58 that's all

 

[Willmo619]

I love the platform, we’re all in it for the same reasons I’d think though. What’s a B58 if it leans out.

 

[SLOWESTN54]

I love the platform, we’re all in it for the same reasons I’d think though. What’s a B58 if it leans out.

B58 or N54 really they self destruct at the same tq level. And post some logs, someone will be able to help.

 

[Willmo619]

True, I only have one log atm. I’m currently running MHD stage 2 on e30, catless dp, intake, xHP stage 3, ngk’s gapped at .022. It was a 3rd gear pull at about 2500-3000rpm.

 

[Willmo619]

Hide legend Reset zoom

 

[SLOWESTN54]

Everything looks good, I'm assuming the lean part in the beginning is the B58 version of spool mode. I reviewed a few other logs and they all appear to do the same.

 

[SlowE93]

B58 or N54 really they self destruct at the same tq level. And post some logs, someone will be able to help.

And what TQ is that would you say ? At what RPM ?

 

[SLOWESTN54]

And what TQ is that would you say ? At what RPM ?

Anything above 550wtq below 5k rpm . I've seen a few doc race 240i's blow in the 710whp range.

 

[Willmo619]

Everything looks good, I'm assuming the lean part in the beginning is the B58 version of spool mode. I reviewed a few other logs and they all appear to do the same.

I appreciate the time looking at it, I have a TU pump incoming Monday. A little piece of mind running ethanol blends. After that, MHD’s CAN FlexFuel kit when it gets released For b58. I’m not really trying to go over 500-550hp.

 

[SLOWESTN54]

I appreciate the time looking at it, I have a TU pump incoming Monday. A little piece of mind running ethanol blends. After that, MHD’s CAN FlexFuel kit when it gets released For b58. I’m not really trying to go over 500-550hp.

Sounds like a solid game plan, Possibily the pure 800 is the turbo for you, should be able to do 550 on pump gas and ethanol.

 

[SlowE93]

Anything above 550wtq below 5k rpm . I've seen a few doc race 240i's blow in the 710whp range.

 

[Willmo619]

Sounds like a solid game plan, Possibily the pure 800 is the turbo for you, should be able to do 550 on pump gas and ethanol.

I’ll look into that, I’m actually curious as to how much the TU pump can handle. I haven’t really found concrete numbers.

 

[SLOWESTN54]

I’ll look into that, I’m actually curious as to how much the TU pump can handle. I haven’t really found concrete numbers.

Just go PI with reflex

 

[Willmo619]

So, I installed the TU pump, and ran a log on mhd stg 2 hpfp 93oct map. Next will be the e40 map, but curious as to if you guys notice anything that may not be good. Lining up the fuel rails to the new pump required some man handling, and I’m hoping it’s good. Any input would be appreciated. Here is the log, hope all is well with everyone.

Log-12-06-2021-22-06-33

Uploaded by API.

www.spoolstreet.com

 

[SLOWESTN54]

You had a lean spike which is concerning but may be an anomaly.

 

[Willmo619]

You had a lean spike which is concerning but may be an anomaly.

Ohh, yeah I see that. That looks like it was during a shift. I wonder if that’s typical during shifts.

 

[SLOWESTN54]

Ohh, yeah I see that. That looks like it was during a shift. I wonder if that’s typical during shifts.

Ahh I didn’t notice the shift part. Should be all good then.