CF Hood Brand recommendations

doublespaces

Administrator
Oct 18, 2016
9,303
4,331
0
AZ
Ride
2009 E93 335i
So, I'm considering buying the Duke Dynamics(or Vorsteiner) E93 CSL style deck lid:

KhOjZzE.png

kKVU4Te.png


And if I do decide to pony up the cash, I'd like to find a high quality CF hood to go along with it. I've bought two CF hoods for my E90, the first one I broke immediately(don't ask). But it was finished nicely on the underside. The second one I got, didn't seem finished on the bottom and it was a bit flimsy. When going fast, I could see the hood literally rippling in the wind, I was afraid without hood pins it would fly off.

So my point is, I'm absolutely not going to use hood pins. Does anyone have experience with a brand of CF hood that does not need hood pins, is sturdy and possibly has hood vents(subtle ones)? I do not like vents, but the under hood temps can get ridiculously high and I think it would help out with IATs.
 
  • Like
Reactions: VACust

VACust

Corporal
Dec 1, 2016
112
53
0
US - Utah
I looked for one just this past 2 months after someone decided to smash into my E92. I really wanted a GT style hood and the ONLY one that seems to fit worth a damn is the steel Ikon Motorsports hoods or Duke hoods. Ikon was 2 months out about 6-7 weeks ago with both vented style hoods. Their vents are closed but can be opened up to function. I got my car back with a stock hood but I think I'm still going to buy one. They have a Vorsteiner style and one that adds M3 vents to the Votsteiner style. I put in a CSF radiator during the repair (huge improvement) but would like to see under hood temps lower. I don't like the idea of hood pins either. Seems a good CF hood is well over $2K before you start paint and fitting. I've been through multiple CF hoods as well. Only one that I've owned that I was 100% happy with was a Saleen S351 hood, they started with a factory Ford aluminum hood frame and built a CF shell.
 
Last edited:
  • Like
Reactions: doublespaces

VACust

Corporal
Dec 1, 2016
112
53
0
US - Utah
I have seen a Duke hood, never owned one. It seemed pretty damn nice. I do think they all have issues with clear/resin turning yellow in spots or small cracks if they aren't painted though.
 

doublespaces

Administrator
Oct 18, 2016
9,303
4,331
0
AZ
Ride
2009 E93 335i
They show this on their site, I'd like something like this but with the actual vent in the center. I'm not much of a fan of the side gills, but I can see how top mount people would be.
qNmrRLI.png
 

Kenjermen

Sergeant
Nov 6, 2016
259
78
75
N las vegas NV
The vents are also a good idea for people not running a cowl. When removing the cowl you had more pressure to the top of the engine due to the Air reflecting off the windshield and into the engine bay. Where the m3 rep hoods and others with vents prevent this issue. It also helps extract heat from under the hood. At a red light I can see the heat coming out of the vents.
 

doublespaces

Administrator
Oct 18, 2016
9,303
4,331
0
AZ
Ride
2009 E93 335i
The vents are also a good idea for people not running a cowl. When removing the cowl you had more pressure to the top of the engine due to the Air reflecting off the windshield and into the engine bay. Where the m3 rep hoods and others with vents prevent this issue. It also helps extract heat from under the hood. At a red light I can see the heat coming out of the vents.

I was wanting to do the M3 cowl 'conversion', I wonder if the same effect would be in play?
 

Kenjermen

Sergeant
Nov 6, 2016
259
78
75
N las vegas NV

Yeezus335i

Specialist
Nov 5, 2016
51
8
0
San Diego, Ca
I have a carbon creations csl trunk, the resin/clear faded within a year. Fitment is not great but its manageable. Would I buy it again, yes but I would definitely have it clear coated within a few months of owning it. It was pretty cheap, i paid like 6 or close to 600 for it.
 
  • Informative
Reactions: doublespaces

doublespaces

Administrator
Oct 18, 2016
9,303
4,331
0
AZ
Ride
2009 E93 335i
Thanks for the review, so are there any other brands of CF hoods that are sub $750 that are high quality?
 

Yeezus335i

Specialist
Nov 5, 2016
51
8
0
San Diego, Ca
I think not, well at least to my knowledge. I would say look into buying a top brand like vorsteiner second hand but they hardly come on the market. I am going to most likely end up buying a VIS hood in the future and have it re-cleared soon after.
 

island road

Corporal
Nov 21, 2016
168
127
0
Boston
Ride
535xiT 2010 M Sport
I had the Dukes Dynamic D2-PowerVented Hood for 5 years before I sold my car. I would say fitment is about 98% true to OEM a few times had the speedo pegged and never had an issue with the hook keeping latched. The vents also helped with heat dissipation not to mention I would say this is the best looking aftermarket hood on the market although not the cheapest. I would 100% recommend any of their products, also had their quad diffuser as well.


N2veWF9h.jpg


g57JtOIh.jpg
 

doublespaces

Administrator
Oct 18, 2016
9,303
4,331
0
AZ
Ride
2009 E93 335i
Nice! Duke stuff is out of my price range, although when your hood flies up and smashes your roof, particularly a hard top, I can't say that is within my budget either.