968HP Dyno Run with PI & BMS JB4

Scorpstan

Corporal
Feb 27, 2017
111
130
0
Ride
335i
hi

i did some nice dyno runs last week.
for me the first time with the BMS Controller for the PI.
before I had the AIC controller, which was by far not so good.

so what to say....it works very very good
happyanim.gif
.
at the end the small 550cc injectors maxed out, and we had to stop at map6 which results in 968hp. time for bigger injectors
smile.gif


here are some logs (map4/850hp+map5/920hp):


big thanks to terry for giving me a few tips about the settings.

Setup:
-335i E92 AT
-Build Engine with closedeck, CP Pistons and Pauter Rods
-Speedtech kit with PT6870
-Mapping by TruepowerSoftware
-selfmade Dual HPFP
-selfmade Stage4 Fuelline Setup with 2x450Walbro
 

Attachments

  • 232322.jpg
    232322.jpg
    104.4 KB · Views: 1,177
  • WhatsApp Image 2020-05-02 at 22.08.50.jpeg
    WhatsApp Image 2020-05-02 at 22.08.50.jpeg
    31.2 KB · Views: 495
  • WhatsApp Image 2020-05-02 at 20.10.28(1).jpeg
    WhatsApp Image 2020-05-02 at 20.10.28(1).jpeg
    181 KB · Views: 758
Last edited:

tisdrew

Corporal
Jun 27, 2017
179
91
0
Ride
09 335i 6MT
That's awesome stuff! nearly a thousand wheel and under 30 psi too. Have you done head work or stock head?
 

N54135iAT

Private
Mar 29, 2019
37
17
0
Ride
BMW E82 135i N54
How much psi and timing for 970 HP with the 6870? Which A/R do you use? seems to fall on its face in high rpms
 

Scorpstan

Corporal
Feb 27, 2017
111
130
0
Ride
335i
How much psi and timing for 970 HP with the 6870? Which A/R do you use? seems to fall on its face in high rpms
34-34,5,
84AR
6500rpm was the end of the run because trims maxed out and jb went to safty mode. ;-)
 
Last edited:

The Convert

Captain
Jun 4, 2017
1,487
1,052
0
Ride
335
Not to split hairs, but images say 968ps, which google says is 954.xx. Still amazing numbers.
 

Snertz

Specialist
Nov 7, 2016
64
51
0
NY
Ride
2011 1M
Cool idea building it into the AC compressor housing. Quite a lot of torque, what's done to the trans?
 

Scorpstan

Corporal
Feb 27, 2017
111
130
0
Ride
335i
Cool idea building it into the AC compressor housing. Quite a lot of torque, what's done to the trans?

Some secret upgrades inside ;-)
Last year I had some probs at 1100nm.
Hope this year it will hold the power.
 

Rileyg

Specialist
Feb 6, 2019
60
36
0
Ride
08 e92
Change out that turbine housing for a larger a/r and I bet you see at least 30 more hp.