Latest activity
-
carabuser replied to the thread What is the cause of fuel mode 6 (cat protection?).Too little timing causes high EGTs. Timing pulls due to knock or traction control will cause it to rise quickly. -
Seb335i replied to the thread Datalog Essaie.2c9e is bank 1 o2 sensor -
fiztec replied to the thread F1X 000021571DAA01 MHD DIY tune boost deviation question - not calculating correctly above 2.5 bar.Hi there. A quick question in order to understand a bit more. Does the DME can really request boost more than 22.5 psi? When I look into... -
N52 prop shafts have much weaker joints and won't last very long, so keep that in mind. -
Hydra Performance replied to the thread Rear axle drive 3.73.N52 prop shafts have much weaker joints and won't last very long, so keep that in mind. -
Traf replied to the thread Rear axle drive 3.73.I dicussed it with Seb a little bit earlier this week, using the 330i AT prop shaft should work as the N53/N52 are roughly the same... -
seb.apprenti replied to the thread Rear axle drive 3.73.The inlet is different, but the outlet is apparently the same (86mm) So I'll try to find these two references 26107551199 and...
-
@seb.apprenti If the diff you're swapping in has the same input-flange style as the one on your car, It should fit without problem...
-
Hydra Performance replied to the thread Rear axle drive 3.73.@seb.apprenti If the diff you're swapping in has the same input-flange style as the one on your car, It should fit without problem...
-
Ummmm we all had 9 years ? News flash, I have zero problems with my head / injectors so.....how do you figure we all had 9 years to fix...
-
Ah.....I must have missed that. So I am a Hater ? Because I 🤣 ? Wow, well as said above, if we do this to our cars it is NOT illegal...
-
turbohugh reacted to Plug and Play Integration's post in the thread DIY N54 Injector bore repair kit with
Like.
Hello. I own PPI. This is my kit. It’s not expensive. It’s appropriately priced for the time we spent last year going back and forth to... -
turbohugh replied to the thread A few questions on self tuning.Make sure your wiring harness to the charge-pipe sensor isn't damaged. If you're using the BMS wire harness check to make sure the pins...
-
fiztec reacted to P33P33's post in the thread DIY Finetuning throttle closure on overboost (S55) with Like.
This is how it works in n54 and I'm 99% sure it's the same logic in n55, s55.
-
Wanted to do something different and I love the e92 m3 gt4 factory race cars. Yes I know this isn’t an M3. I don’t care frankly. Cars...
