Latest activity
-
Dumaurier7 replied to the thread F2X First N55 Build.Finally got done putting together this crate to send the head off to VAC! my carpentry skill aren't as bad as I thought!:) I... -
-
Today the PB brakes finally went in. Unfortunately my first attempt failed last week. The EBC yellowstuff DP4005R I sourced myself... -
MMoreBoost reacted to Jeffman's post in the thread Boost target max 21psi. 3.5bar map configuration problem? with
Like.
Increasing Adder is how I got my stockers to go to 23-24 psi … whether or not that’s wise is a whole other thread. 😳 -
ShocknAwe replied to the thread Stalling at initial Acceleration and Stutters at Low RPM B58.Hard to say without seeing readout. See if you can borrow some logging software. Or throw some basic maintenance at it. Fuel spark air -
The compressor housing had only some really minor scratches. I polished them on a lathe with some scotch brite. The compressor wheel is... -
Ttobi01 replied to the thread SOLVED Car smoking after 17t install.The compressor housing had only some really minor scratches. I polished them on a lathe with some scotch brite. The compressor wheel is...
-
-
wheela replied to the thread SOLVED Car smoking after 17t install.Nice solution on the inlets👍 Holy craparoni on those old compressors. Did you use the same compressor housings with the new...
-
Some progress happend. ;-) I dissmanteld the cartrige and had the following findings: During disassembly of the turbo i noted, that...
-
Some progress happend. ;-) I dissmanteld the cartrige and had the following findings: During disassembly of the turbo i noted, that... -
Ttobi01 replied to the thread SOLVED Car smoking after 17t install.Some progress happend. ;-) I dissmanteld the cartrige and had the following findings: During disassembly of the turbo i noted, that...
-
-
ktb_e92 replied to the thread Need help with intermittent codes/warm start issue.I will! Yeah if you're going to do that, no harm in not trying out the ARM upgrade as well. But that is true, a failing throttle body... -
Wwhyzee125 replied to the thread Need help with intermittent codes/warm start issue.Noice--keep us posted! I also might pick up a good used manifold and do the ARM method vs the barb. There's one on eBay that comes with...
-
Wwhyzee125 reacted to ktb_e92's post in the thread Need help with intermittent codes/warm start issue with Like.
No problem, sounds like a good next few steps. Keep us updated! And yeah for sure. I'm not one to be too optimistic about a fix I do...
-
ktb_e92 replied to the thread Need help with intermittent codes/warm start issue.No problem, sounds like a good next few steps. Keep us updated! And yeah for sure. I'm not one to be too optimistic about a fix I do...
-
ktb_e92 reacted to whyzee125's post in the thread Need help with intermittent codes/warm start issue with Like.
This is very helpful, thank you! It looks like a good next step will be to pull the intake manifold, double check the seal on my barb...
