x6011 12v Switched for Stand Alone Install.

[E90FAN]

Hello

Just seeing if anyone can help me find the 12v switched on the x6011 connector in the DME box?

I tried following all of the LSE90 guides but they are using non turbo e9x's, and the x6011 seems to have different colors/pins.

with NewTIS down im hoping someone here knows the pinout for the x6011

also if you know of a better switched 12v please just lmk, this is the last part and I feel like a dumbass at the moment.

 

[SJ_1989]

Start with these. If it doesn't have what you need I can look through my Bentley manual when I get back home.

 

[E90FAN]

Thank you! @SJ_1989

and for anyone else doing an install on a e9x that started life as a turbo car...

Pin 12 on the x6011 is 12v switched/the correct one to use

 

[E90FAN]

are JZ swaps allowed here?

 

[SJ_1989]

No problem. I've been going through these and the Bentley manual quite a bit while wiring my Haltech.

JZ swaps are most definitely allowed. I specifically deleted DI and bought a Haltech so I can swap to one in the future.

 

[E90FAN]

ok ill make a thread in a bit

 

[RuskiRacer]

are JZ swaps allowed here?

Absolutely

 

[E90FAN]

ok sweet!

I'm almost done figuring out the loom, and have the JZ in to mock everything up, once I'm done doing this diagram, ill make a thread, swear

 

[Tg22]

ok sweet!

I'm almost done figuring out the loom, and have the JZ in to mock everything up, once I'm done doing this diagram, ill make a thread, swear

Hey man could I ask you why u took relay out on your later revision?