VTT Ball Bearing Testing Teaser

[Chris@VargasTurboTech]

Tony put the prototype set of GC+ BB on the high speed today to run them through some paces before they go on the car. Here is a quick blip up to 200,000 RPM then back down(turn the volume up). Enjoy.

 

[doublespaces]

That is pretty sweet, what other test procedures do you do on this thing? Do you do a longer duration?

 

[Chris@VargasTurboTech]

That particular machine is for balance -yes we do significant other testing too. Most of that would fall under the proprietary category but all of it falls under the awesome category.

 

[doublespaces]

That BB is noisy! Love it

 

[Chris@VargasTurboTech]

Most of that noise is the machine.

 

[doublespaces]

Most of that noise is the machine.

Oh, disappoint. I suppose there wouldn't be so much noise without the housing on? Good thing you're the turbo guys and not me.

 

[ATL-IS-N54]

That particular machine is for balance -yes we do significant other testing too. Most of that would fall under the proprietary category but all of it falls under the awesome category.

Yeah the compressed air balancing machine... Usually used to rebuild and rebalance compressor wheels, That and then a little grind here and there.,.

 

[Xshadows]

Besides the obvious benefits from BB... this helps with the turbo seal issue right?

 

[Chris@VargasTurboTech]

Besides the obvious benefits from BB... this helps with the turbo seal issue right?

Not sure what you mean by "the turbo seal issue", but BB is superior in all ways. Will even make you get a promotion at work and give you 38% more of a refund when you do your taxes.