Throttle closures - log linked

[Potato]

Hey guys,

E61 N54, MHD stage 1, 91 octane. I keep getting throttle closures under full throttle. I can't get a good log because the closures but here is a short one:

http://datazap.me/u/potato/e61-n54?log=0&data=3-5-10-23-26-30&zoom=16-42

Any ideas?

Newer plugs, carbon cleaning, vacuum lines, injectors, coils. I do get a 30FF on occasion. I have pretty noticeable wastegate rattle. I turned off the MHD wastegate rattle fix and it did not seem to help the throttle closures.

 

[Potato]

I haven't done any maintenance on them.... I do have a bit of vibration under hard acceleration that my mechanic was not able to completely eliminate (we rebuilt the driveshaft & replaced the front axles). He thought it might be flywheel related but wasn't sure. Perhaps these are related...

 

[Derek@MoorePerformance]

I haven't done any maintenance on them.... I do have a bit of vibration under hard acceleration that my mechanic was not able to completely eliminate (we rebuilt the driveshaft & replaced the front axles). He thought it might be flywheel related but wasn't sure. Perhaps these are related...

With everything off.. you should only get limited power if it thinks that it would ultimately save the DSC or 4x4 system. Kind of like an emergency kill switch you could say.. but, drive around normally but, cut the DSC off (DTC one click) just to see if anything occurs. You don't need to consistently keep it off but, just to see if any other signs occur.

Also, any clunking or anything when slowing down a lot?

 

[Potato]

It does seem like something is intervening "as a last resort". I will try driving around after pressing the DTC button once to see if I notice anything.

I don't recall any clunking.

 

[Derek@MoorePerformance]

It does seem like something is intervening "as a last resort". I will try driving around after pressing the DTC button once to see if I notice anything.

I don't recall any clunking.

Correct me if I'm wrong but, the iDrive message you got was with DSC/DTC OFF?

 

[Potato]

DSC/DTC were off (held down the DTC button for several seconds).

 

[Derek@MoorePerformance]

DSC/DTC were off (held down the DTC button for several seconds).

Hmm... I'm going to see what all I can unearth from all the evidence here. Have you coded anything via NCExpert or WinKPF?

 

[Potato]

Replaced the turbos and installed AR catted downpipes. Rattle is gone, throttle closures are gone. Pulls strong. Re-flashed to stage 1 MHD.

 

[Bmwfixerguy1]

Not trying to be a jerk but you havnt posted a log in a higher gear with dsc off yet.. You need to be in 3rd or 4th

We said that first thing and you havnt replied back saying, ok tried it In 3rd and 4th with dsc off and it's still doing it lol