Tables to modify to decrease dsc control

Nick1224

New Member
Mar 1, 2018
2
0
0
Ride
08 335i 6mt
I have been having issues with dsc throwing me into fuel code 15 while at autox (on a track with crappy surface). Then I go into limp mode and my run is toast. I'm not ready to drop a lsd in yet, so was wondering if there was a way to decrease the amount the dme can control torque.

08 335i 6mt fbo on e85
 

doublespaces

Administrator
Oct 18, 2016
9,303
4,331
0
AZ
Ride
2009 E93 335i
That would be a question probably for @jyamona

Perhaps other tuners are aware of how to do this, but I don't know how any of that works personally.
 

cookiesowns

Private
Nov 13, 2017
26
7
0
Ride
2010 535i ZHP6 + 2017 M2 6MT
What car? Might be able to code DSC module to add in "Euro MDM" so to speak on a non M car. That said, are you running with DSC completely off? If not, why not?
 

Jake@MHD

Major
Platinum Vendor
Nov 7, 2016
1,593
2,058
0
Philly
That would be a question probably for @jyamona

Perhaps other tuners are aware of how to do this, but I don't know how any of that works personally.

I can stop DSC intervention all together on the DME side, or make one press act like full off. However, I can't tweak how much torque gets reduced. That request comes from the DSC module itself, based on the amount of wheel spin.
 

dzid_

Specialist
Feb 22, 2018
54
35
0
US
Ride
135i 2011 DCT
Do you know if there is a way to keep Sport button mode active when DSC active (one press)?
On my 135i 2011, when DSC is active, I am losing turbo lag reduction that Sport button is giving. Only higher shiftpoints are there.
 

Bnks334

Lieutenant
Dec 1, 2016
524
340
0
New York
You can change parameters in the dsc module to change the slip angle and torque factors but it's not perfect. Just turn it all the way off and learn to drive your car.
 
  • Like
Reactions: Jake@MHD

tony@codewerx

Corporal
Apr 1, 2017
172
40
0
Ride
E92
Would not recommend turning the ediff off ... the rest of it is fine in the dsc.

Raising the cells torque intervention table may help ..