RHD Long Runner Single Turbo

[Brule]

Started porting the flange to manifold runners.
End of the day so mounted the 7675 Precision turbo.

 

[Torgus]

a big boy turbo!

 

[Brule]

7675 bb T4 Divided 1.12AR

 

[Brule]

6466 T4 Divided 1.0AR

 

[Brule]

Fits small and large turbos.

 

[Torgus]

Do you plan on selling manifolds locally?

 

[Brule]

Nah.
I just make a new setup each year at end of the racing season.
This year I made 2 due to a request and im just finishing this one in time for an August roll racing event.

 

[N54gasm]

That aug roll race event happen to be mpact?

 

[Brule]

 

[Brule]

I have been measuring the runners by filling them with water.

First revision I was around 170ml difference.
After 5 revisions I achieved both banks from cylinder to T4 flange 1250ml each.

Hopefully the effort makes it sound nice.

 

[Brule]

Done a bit of work.

Will be running next weekend.

 

[doublespaces]

Good work!

 

[wheela]

Wow, I'm sure a lot is the camera angle, but that turbo is HUUUUGE!!!

 

[Brule]

Wow, I'm sure a lot is the camera angle, but that turbo is HUUUUGE!!!

Maybe, it makes the 6466 look small.

Heres a few other photos.
Its a 7675 Sportsman T4 Divided 1.12AR

 

[Brule]

6466 gen 2 bb T4 divided 1.0AR vs
7675 gen 1 Sportsman bb T4 Divided 1.12AR

Bottom photo is 6266 gen2 T4 divided .84AR vs 7675 LS series T4 Open H cover

 

[aus335iguy]

Just a smidge bigger than stock.

 

[Torgus]

Might suck up a squirrel or small child with a turbo like that

 

[Brule]

Could start it tonight but I'm going to finish it off tomorrow.

Hope it sounds good.

 

[rac]

a good a morning to inhale some unburnt fuel brule! good luck.

 

[Brule]

a good a morning to inhale some unburnt fuel brule! good luck.

Started.
Sounds like shit.
Im buying an LS.