Datalog Replaced lpfp worked for 3 days now wont start.

[ididsomething]

It worked for a couple of days now no start. This is a log of it not starting. It’s on stage 2+, fbo. I also have a log from the day I installed the lpfp if you want to see it.

Hide legend Reset zoom

 

[Z4Dude]

If you turn your RPM and Boost off in the graph and then turn on your Low pressure fuel sensor and your Rail pressure they are essentially the same .. doesn't look like your HPFP is working - it should be far above the LP reading.... maybe at a minimum of about 1500-2500?

Are you getting any codes and have you double checked the connections to your HPFP? I dont think your injectors have enough pressure to fuel the cylinders.

 

[ididsomething]

Here is the log just after replacing the lpfp.

Hide legend Reset zoom