Need the male fitting for lpfp line by sensor
- Thread starter Gavin
- Start date
You're looking for a 5/16 efi push on fitting. Depending on the type of line you're running and arrangement there are a few choices.
There are lots of choices here from many manufacturers but here is one from speedflow
speedflow.com.au
AN Male to EFI Male Tube From
The official website of Australia's only Performance Hose Fitting Manufacturer!
speedflow.com.au
Didn't see your post martymil,just to confirm is the stock line a 5/16" size.you posted 2 different sizes martymil
If the end goal is to eliminate that hard line you could also eliminate the 12" long oem soft line as well. All you would need is a 5/16 female quick connect fitting and make that pushlock hose another 12-16" long. Just an idea.
But it is 5/16 FWIW. I bought a few fittings to replace the soft line when I added my flex fuel sensor.
But it is 5/16 FWIW. I bought a few fittings to replace the soft line when I added my flex fuel sensor.
screaminfast
Sergeant
I was gonna do that too but decided against it because the LPFP sensor is M10, NOT 1/8npt as some have used. Talking with Tony from VTT seems to be that it’ll support upwards of 850+whp even with the stock line there.
Ran it like that for 3 years without issue but you wanna be anal
www.efisolutions.com.au
Straight Male 1/8 NPT To Female Metric M10 x 1.0 Port Adapter (Black) 925-04-M101BLK
Straight Male 1/8 NPT To Female Metric M10 x 1.0 Port Adapter (Black)
screaminfast
Sergeant
Ran it like that for 3 years without issue but you wanna be anal
Straight Male 1/8 NPT To Female Metric M10 x 1.0 Port Adapter (Black) 925-04-M101BLK
Straight Male 1/8 NPT To Female Metric M10 x 1.0 Port Adapter (Black)
True. I had actually designed this but changed my mind:
Similar threads
