N54 Stock DME Flex Fuel

E90TommyB

Private
Installed my flex fuel kit and full feed upgraded fuel lines last night, got everything working and reading right. Take my car to the gas station to put some E in it, getting excited to go do some pulls as i've never experienced my car with E85 in it. I was pulling out of the gas station and my car starts sputtering, so im like wtf is it now. My car dies on the side of the road and won't start back up. I get out to check everything out and i see a big wet puddle on the street. I walked up to see if it was coolant, oil, or gas although i new it was gas because right when i got up to it you could smell the E85. Long story short fuel line popped off because i must have forgotten to tighten one down all the way and ended up stranded and having to get towed. Anyways i just thought i was share my embarrassing fail.
 

noorj

Corporal
anybody else added to the beta group, but still showing v1.66 for the MHD version? The app itself says beta, and I got a notification from google play that I was added to the beta group. But it shows version 1.66 still
 

fmorelli

Lieutenant General
Staff member
anybody else added to the beta group, but still showing v1.66 for the MHD version? The app itself says beta, and I got a notification from google play that I was added to the beta group. But it shows version 1.66 still
Did you send an PM to @jyamona with your Google Play store email address? He needs to add you to the list or it will do exactly that (ask me how I know).

Filippo
 

noorj

Corporal
Yeah I did, but I think I may have not clicked on the link to confirm the add quick enough. Sent him another email
 

Abacus38

Lieutenant
Myself and Chris obviously have been for quite some time haha. He has a local friend or two running it as well.
Hopefully by Friday I'll be in club just waiting for everything to show up. Trying to get everything installed and running before I have to fly Louisville for training.
 

Erichale77

Lieutenant
I have everything I need to run FF except some new fuel line. Waiting on my rear flares to be finished next week and then install new fuel system. Then I should have some ST custom tune FF data
 

Erichale77

Lieutenant
What kind are you getting made? 135 or 335? And riveted or molded?
335i, actually they're bolted not riveted.
What kind are you getting made? 135 or 335? And riveted or molded?
It's a 335i and the flares are actually bolted. 20180512_090229.jpg 20180512_172114.jpg
 

noorj

Corporal
got mine up and running! super easy install. current cal for e85 was spot on, we'll see how close I got the other blends. ethanol % populates about 7s after ignition. FYI my setup is MMP S3 turbos with BMP port injection
 

NoGuru

Captain
Would you like Data logs submitted through Datazap, or as .CSV files?
I'll just start dumping logs on here if you like :D
 

Attachments

  • 2018-06-10_14_23_44_INA0S_FF_v8.0_Stage_2+_93oct_98ronDCT[1].csv
    10.1 KB · Views: 116
  • 2018-06-10_14_44_57_INA0S_FF_v8.0_Stage_2+_93oct_98ronDCT[1].csv
    14.4 KB · Views: 95
  • 2018-06-10_18_35_51_INA0S_FF_v8.0_Stage_2+_93oct_98ronDCT[1].csv
    14.1 KB · Views: 97
  • 2018-06-11_06_36_06_INA0S_FF_v8.0_Stage_2+_93oct_98ronDCT[1].csv
    9 KB · Views: 107
  • 2018-06-11_06_41_22_INA0S_FF_v8.0_Stage_2+_93oct_98ronDCT[1].csv
    11 KB · Views: 101
Top