Meth Injection Nozzle Size

[KClemente]

Thinking of going meth to compliment my upgraded twins. What’s a good nozzle size for 30 psi worth of boost? The kit i’m getting is a coolingmist and comes with a single cm10 nozzle.

 

[typedRew]

not tuning for it? that should be a good nozzle for intake cooling strictly

two smaller nozzles on opposing sides would distribute better, but not completely necessary if only used for intake temp cooling

 

[Terry@BMS]

At least dual BM7, ideally dual BM10.

 

[General.Massacre]

A mate of mine is running Dual CB11 nozzles on his 14T hybrid turbos.
Still custom tuning, but his IAT are extremely low at least, but his STFT are -25, so there is alot of octane coming in (80/20 Meth/water).
Preparing for Port Meth injection with 6 x CB2 nozzles, and 2 x CB5 in the CP.