I recently installed a PR Stage 3 LPFP. I did the modular upgrade from the stage 2. I suspect it's not coming on via the pressure switch at 13psi. Is there an easy way to tell if it's running? I can hear the main pump prime fine when the door opens.
Can I simply short the sensor wires to get that pump to engage?
Sorry if this seems like a dumb question, but the pressure sensor (PR says it's not a Hobbs switch) didn't have any information or datasheet with it.
Can I simply short the sensor wires to get that pump to engage?
Sorry if this seems like a dumb question, but the pressure sensor (PR says it's not a Hobbs switch) didn't have any information or datasheet with it.