I have a dashcam and I have to take it out each time I work on the electronics of my car so I'd like to hardwire it without running a wire down the A pillar airbag. I have seen a DIY on how to do this using the homelink power(included below), but it was for an E90 I believe, my E93 looks a bit different. I suspect there will be some sort of power up there regardless so I'm hoping this may still work.
My question, has anyone done a hardwire job like this without running a power wire down the side of the car? And if I got a radar detector later, I wonder if I'd be overloading that wire running the homelink, radar detector and dash cam simultaneously. I suppose I'd need to check and see what the fuses is rated for also.
Here is the guide I found previously:
My question, has anyone done a hardwire job like this without running a power wire down the side of the car? And if I got a radar detector later, I wonder if I'd be overloading that wire running the homelink, radar detector and dash cam simultaneously. I suppose I'd need to check and see what the fuses is rated for also.
Here is the guide I found previously: