Fab Factory Intake Manifold with Direct Port Meth

doublespaces

Administrator
Oct 18, 2016
9,303
4,331
0
AZ
Ride
2009 E93 335i
Here is the latest new option when ordering a Fab Factory manifold from @A4RingedONE8T

We have a direct port meth setup using Aquamist injector style nozzles and custom rail with modified 4AN fittings. By far the cleanest solution for those wanting an octane bump

23715075_1618315524893091_808871262_o.jpg
23715168_1618315431559767_1884054515_o.jpg
23730557_1618315404893103_187528559_o.jpg
23760054_1618315418226435_416141642_o.jpg

23423759_1608871489170828_147231802_o (1).jpg
23433015_1608871522504158_295810628_o.jpg
 

Bmwfixerguy1

Lieutenant
Jun 5, 2017
875
292
0
Ride
07 335i MT
I'm curious how they seal to the inlet of the nozzle. I've learned there are two direct port nozzles from AM. They have one that threaded 1/8 npt and looks like o ring sealed.

What nozzles are you using @A4RingedONE8T
 

A4RingedONE8T

Specialist
Nov 1, 2016
82
134
0
40
I have one more manifold built with this head flange if anyone's interested. The one shown is in route to Jason @ Propulsive Dynamics. The injectors and fuel rail system here are custom at his request. You should use the same injectors as shown here but your own more basic/standard lines and connections to them can be made and save about $1,000 over what's shown. The JIC to AN fittings - which I then had to have modified further - 4AN unions, and stainless 4AN weld on's were almost $800 just for the fittings, plus the injectors, plus the rail. Badass setup no doubt, just what we like, not for the tame of heart!
 
  • Like
Reactions: Omar@VaderSolutions