FS F10/F80/F82/F83 BMC High Performance Air Filters

Jul 24, 2018
108
100
0
Ride
2003 M5
Up for sale is a pair of lightly used BMC filters for BMW M3/M4 and M5. These have been installed and have some miles on them but are still useable. For an additional questions feel free to contact us at [email protected] or (919) 501-2090.

Looking to get $100 for the pair or OBO





The panel / cylindrical air filter is commonly referred to as "replacement air filter". It is installed in the vehicle's original airbox to replace the OEM air filter. It is made of highly performing materials that allow an increased air flow combined with a more efficient filtration, guaranteeing containment of all impurities from as small as 7 microns (compared to OEM's 10 microns).

bmc_vs_oem.jpg

Air flow chart for a sample BMC air filter against an OEM paper filter
Temperature 25C° - Humidity 25% - Pressure 1020mbar
Test ran with oem airbox, and the related air flow constrictions.
This chart has a pure illustrative purpose and does not refer to the present filter.

BMC air filters are produced using a "Full Moulding" system that enables the characteristic red filter to be realized from a single mould with no welded joints thus avoiding easy breakage. The rubber used in BMC air filtering systems has a long life, is very durable and has optimum adhesion characteristics to all shapes of airboxes.

BMC filters are made of a multi-layered cotton gauze soaked with low viscosity oil covered with an epoxy coated alloy mesh to ensure protection from petrol fumes and oxidization due to air humidity.
 

Attachments

  • IMG_4613.jpeg
    IMG_4613.jpeg
    251.4 KB · Views: 57
  • IMG_4614.jpeg
    IMG_4614.jpeg
    264.7 KB · Views: 53
  • IMG_4615.jpeg
    IMG_4615.jpeg
    161.1 KB · Views: 51
  • IMG_4616.jpeg
    IMG_4616.jpeg
    159.1 KB · Views: 54
  • IMG_4617.jpeg
    IMG_4617.jpeg
    241.7 KB · Views: 55