DOC Race 6466 1M does 773hp/707tq

doublespaces

Administrator
Oct 18, 2016
9,303
4,331
0
AZ
Ride
2009 E93 335i
r4tJyJz.jpg

@DOC_Race powered car from Bahrain was on 34psi on VP C85
 

Velocity26

Specialist
Feb 7, 2017
61
21
0
Tampa, FL
Ride
2010 335i
This validity of this dyno has been questioned and it appears that things were done to create the spool shown above. At least extreme use of rolling anti-lag and possibly N2O. Show me another single that can produce 400 lb/ft of torque at 2,000 rpm. Pretty sure you would struggle to show me twins that can duplicate that on a 3.0L motor. I have no doubt that they can produce the HP/Torque shown above, but there is NO WAY that they can make that size turbo spool like that without using some external trickery. I would LOVE for this to be true (sign me up today) but this IS too good to be true.
 

Abacus38

Lieutenant
Nov 2, 2016
643
385
0
34
Tampa/Orlando, FL
Ride
2007 Ti Ag 335i
How is that a fake dyno run? They prob used Antilag or n20 spool the turbo that low. This is common on the supra platform.
 

Terry@BMS

Sergeant
Platinum Vendor
Jan 23, 2017
462
379
50
Dyno was done using JB4 anti-lag.... A must have for any rolling race with a big single! :)
 

Velocity26

Specialist
Feb 7, 2017
61
21
0
Tampa, FL
Ride
2010 335i
I think that we have just crossed a line that will be difficult to return from. We look at this stuff being shown to us by vendors and expect that our cars will perform comparably when we install them on our cars. From this point on, I would not blame Tony and they rest from showing their turbo kits with ant-lag, N2O, whatever it takes to make their products perform their best. At the very least, vendors should tell us what was on the car when that test was done.
 

Terry@BMS

Sergeant
Platinum Vendor
Jan 23, 2017
462
379
50
There are hundreds of our anti-lag kits out in use... Almost no one runs nitrous, lol. It's not like they are equivalent.

Always take any result posted, especially by vendors, with a heavy grain of salt. In this case limited information was available on the car as there are language barriers.
 
Nov 5, 2016
615
624
0
Bay Area
We NEVER use dyno tricks to inflate graphs, show higher number etc. We would not dyno using anti-lag than post it. Not only that, they didn't even mention they used anti-lag just compounding the issue. As for anti-lag being awesome for roll racing, it does help for sure, still waiting for all these fast singles to show up to these roll events...:)
 

Terry@BMS

Sergeant
Platinum Vendor
Jan 23, 2017
462
379
50
You know the deal with this one. The owner barely speaks English, doesn't use the forums, and neither Doc Race or I saw much data on it. Doc Race posted it as a result of their manifold knowing almost nothing else about the car other than it had their manifold. I don't think they were trying to hide anything but any time you have a dyno posted without a detailed log to go with it, my bogus radar goes off too. It is what it is on that one.
 
  • Like
Reactions: AK135i