Latest activity
-
Vvadonchez replied to the thread N54 DME torque limits, torque tables and torque reporting discussion.Thanks, No but i have wg rattle fix set @0% wich produce burble even without burble parameter set to ON
-
mikeseli replied to the thread N54 exhaust camshaft upgrade.The N54 intake cam is 47.3mm based on how you’re measuring (base circle + cam lift). The N54 exhaust cam is 41.3mm as you show in your... -
carabuser replied to the thread N54 DME torque limits, torque tables and torque reporting discussion.Minimum torque. Not seen that before, but it's probably because the torque being produced by the engine is less than the minimum in that... -
oVeRdOsE replied to the thread 3.5 TMAP reading are off (+/- 5psi) on JB4.you think this might affect it? Is my setup correct ? good question. So I'm single turbo, so I've a blowoff valve 1'' with spring to... -
MMoreBoost replied to the thread 3.5 TMAP reading are off (+/- 5psi) on JB4.Are your diverter or Blow off valves setup correctly? I've never had meth injection cause problems with the TMAP.
-
oVeRdOsE replied to the thread 3.5 TMAP reading are off (+/- 5psi) on JB4.I'll try that for sure tks. but doubt this is jb4 issue, when the reading finally stabilize after 1or 2 min of cruising, and do a...
-
Vvadonchez replied to the thread N54 DME torque limits, torque tables and torque reporting discussion.HI guys Somebody know what does TQ limit 128 mean? I made some logs today on V10 OTS MHD map and hit this TQ limit when i let of...
-
MMoreBoost replied to the thread 3.5 TMAP reading are off (+/- 5psi) on JB4.I've actually possibly had similar issues. The mhd flash and the jb4 both affect what the tmap reads to the dme. If you enable the boost...
-
oVeRdOsE replied to the thread 3.5 TMAP reading are off (+/- 5psi) on JB4.Ive a external pneumatic boost gauge, the pressure is fine. on idle im in vacuum. So yes, 100% sure the fuel delivery is bad because...
-
MMoreBoost replied to the thread 3.5 TMAP reading are off (+/- 5psi) on JB4.Something is messed up there. You shouldn't see 45psi. Sounds like all that sprayed fuel probably due to the wrong boost reading is...
-
MMoreBoost replied to the thread A few questions on self tuning.Hi Carabuser. Yes. I've flashed my stock bin. As my car is a European 335i with DCT, my DME is IJE0S. After alot of trial and error...
-
Peter55 replied to the thread High rpm misfire cyl6 - all new parts.It seems a lot like my issue - worn flywheel was a cause... -
Peter55 replied to the thread N54 exhaust camshaft upgrade.Something doesn't adds up here, even catcams says that stock N54 exhaust cam lift is 9.7mm. Also when Hydra Performance says it's true...
-
oVeRdOsE replied to the thread 3.5 TMAP reading are off (+/- 5psi) on JB4.UPDATE. so the new TMAP lasted me around 60-70 km. I had loud pops when I lift the throttle, so Ive open the app, and the TMAP read...
-
wheela replied to the thread 135i updates.+1