Latest activity
-
EPOXY54 replied to the thread Technical Official N54 Epoxy Discussion.Hey, we had changed the post regarding the confusion, but we thought it was obvious as my username reflects the product we are... -
-
wheela reacted to Hydra Performance's post in the thread Technical Official N54 Epoxy Discussion with
Like.
Closing the deck is probably a necessity in the long term if one wishes to run boost levels (and cylinder pressures) beyond what is... -
Hydra Performance replied to the thread Technical Official N54 Epoxy Discussion.Closing the deck is probably a necessity in the long term if one wishes to run boost levels (and cylinder pressures) beyond what is... -
seb.apprenti reacted to rev210's post in the thread Technical Official N54 Epoxy Discussion with Like.
Usually the rationale for open deck is simple , it's cheaper and offers a cheap design efficiency gain for cooling. It's generally... -
HIf it ain't broke don't fix it. I'd need a LOT of proof I really need to close my deck before making that kind of modification, and then...
-
rev210 reacted to Hydra Performance's post in the thread Technical Official N54 Epoxy Discussion with Like.
Don't want to rain on anyone's parade, but based on my previous experience with block-filling there is always a chance of filler... -
rev210 replied to the thread Technical Official N54 Epoxy Discussion.Usually the rationale for open deck is simple , it's cheaper and offers a cheap design efficiency gain for cooling. It's generally...
-
There are no active codes which surprised me. The car is doing the same thing with the msd81 as it did with the msd80 with the exception... -
Aallenj125 replied to the thread Datalog 3/4/2025.There are no active codes which surprised me. The car is doing the same thing with the msd81 as it did with the msd80 with the exception...
-
JohnDaviz replied to the thread GS7 program code disassembly project.What does this table do? -
At first sight i can see only SPC (DRM_SHIFT - during shift stage) corrections for clutch torque offset. That table...
-
ktb_e92 replied to the thread Datalog 3/4/2025.What trouble codes are being tripped when it breaks up over 10psi of boost around 4500rpm? Sometimes a failing MSD80 can take out one...
-
Eevotme replied to the thread Ad: Hydra Performance Official Product Release Thread.Hi any news on the custom tune?
-
HobbsyUK replied to the thread M57 - How to fit a N54 intercooler and delete red boost hose.Sorry if you no longer have this setup but I wanted to do the same for my 335D, currently noticeable oil residue on both cold and hot...
-
N55 m2 replied to the thread Datalog Advice on data logs.Hi C, please check if you can pick up anything Tx -
