Tunerpro question

JSR1256

Private
Nov 17, 2016
41
3
0
37922
In tuner pro I set load target and load target AT at 210 across the board and the last two at 205, 200 but load target is still in the 180s on log and tapering to 14psi. Anyone have any input? I'd like target boost to be higher with little taper and allow it to taper on its own.
 

Twisted Tuning

Lieutenant
Platinum Vendor
Oct 25, 2016
974
903
0
New York
www.twistedtuning.com
Ride
N54 and N55 Cars
In tuner pro I set load target and load target AT at 210 across the board and the last two at 205, 200 but load target is still in the 180s on log and tapering to 14psi. Anyone have any input? I'd like target boost to be higher with little taper and allow it to taper on its own.

make sure you dont have "Boost Target By Gear" or "Load Target By Gear" enabled
 

V8bait

Lieutenant
Nov 2, 2016
500
773
0
Texas
Set "boost limit multiplier" in limits to 3 and "boost ceiling" under boost control to 1.5