spare gaskets for outlet 2 "

[seb.apprenti]

Hi friends Do you know where to find spare gaskets for outlet 2 "? there is an equivalent at bmw? for the moment I have no problem, it is to put in reserve

 

[Jern54]

glue one yourself?

 

[seb.apprenti]

I think the translation is not there are two black o-rings I would like to know where I can find a spare part

 

[SLOWESTN54]

Hi friends Do you know where to find spare gaskets for outlet 2 "? there is an equivalent at bmw? for the moment I have no problem, it is to put in reserve

I might be wrong but don't these come in the turbo install kit.

 

[seb.apprenti]

I might be wrong but don't these come in the turbo install kit.

I must express myself badly Sorry the pipes are installed and the o-rings too ... everything is fine the seals are not eternal and I would like to buy some before I get bothered where do you find those o-rings?

 

[SLOWESTN54]

I must express myself badly Sorry the pipes are installed and the o-rings too ... everything is fine the seals are not eternal and I would like to buy some before I get bothered where do you find those o-rings?

These are the O rings that go from the turbo to the outlet https://www.fcpeuro.com/products/bmw-o-ring-13717568030 These are the Vbands that connect them incase you wanted to replace them https://www.fcpeuro.com/products/bmw-clamp-11657558922

 

[seb.apprenti]

these are the O-rings for the original pipe on the 2 "pipe the O-ring is bigger no

 

[SLOWESTN54]

these are the O-rings for the original pipe on the 2 "pipe the O-ring is bigger no

Ahhh. Yea those are most likely different. Sorry for the confusion. Just contact the company which you bought them from originally they'll be able to get you a spare set of o rings in the correct size.

 

[Jpotter]

Are you talking about this oring?

 

[Jpotter]

Oh never mind i looked at your photo a bit more

 

[seb.apprenti]

Oh tant pis j'ai regardé ta photo un peu plus

non, pas le joint torique d'origine mais le joint torique de sortie 2 "