Single turbo N54 Misfires

Daniel.B

Lurker
Dec 9, 2018
16
0
0
Ride
07 335
Hey guys!

Just finished my single turbo build and are now trying to make some logs for tuning.
But I am experiencing som misfire issues on high rpm and high load.

Car is a 07 335i N54 MSD80. Running MHD with a custom tune and BoostBox.

I am usually getting these codes:
29CC - DME: Combustion misfires, several cylinders.
29CD - DME: Combustion misfires, cylinder 1.
29CE - DME: Combustion misfires, cylinder 2.
29CF - DME: Combustion misfires, cylinder 3.

Plugs are NGK 97506 and Bosch coils. Both are new. Regapped plugs to 0.02". Also tried swapping both plugs and coils around.
Still getting these kind of codes on cylinder 1-3. Not always all of them. Sometime just one or two cylinders.

I have just rebuilt the engine and plugged off vac ports, so these are clean. Injectors are brand new oem index 12.

Can this be a Mosfet issue?

Thank you for any input!
 

Daniel.B

Lurker
Dec 9, 2018
16
0
0
Ride
07 335
Thank you! I will check the dme and take contact if there is a problem with it.

Here is a log. I got misfires at 6500 rpm, hence not reving longer.

 

Daniel.B

Lurker
Dec 9, 2018
16
0
0
Ride
07 335
Thanks for input guys. I will hear with my tuner. Hopefully it is just the tune causing this.

What would you recommend if I need new 02 sensors? I have a Speedtech kit. How are those NTK sensors?
 

Bmxr152

Specialist
Jul 13, 2019
50
7
0
Lake tahoe
Ride
N54 e90 single turbo
Thanks for input guys. I will hear with my tuner. Hopefully it is just the tune causing this.

What would you recommend if I need new 02 sensors? I have a Speedtech kit. How are those NTK sensors?
Did you ever figure out what was causing the bank 1 issues? I am currently having the same issue with brand new ntk 02 sensors.
 
  • Like
Reactions: Daniel.B

Daniel.B

Lurker
Dec 9, 2018
16
0
0
Ride
07 335
Did you ever figure out what was causing the bank 1 issues? I am currently having the same issue with brand new ntk 02 sensors.

No, trying to figure this out. I have tried a bunch of things. What issues are you having? Log?

Are you built motor now? Desensitize your knock sensors.

I have rebuilt it and lowered compression.

Is this a setting in MHD? Could this be causing problems with one bank?