Question on PSP outlet for MMP Stg 3
- Thread starter fmorelli
- Start date
PSP responded to my email and apparently it is supposed to look like that. They said:
"Hello,
I apologize for the delay as I didn’t see your first email.
In reference to your picture. The part is not damaged or improperly QC’d.
That is a 135 degree 1D bend on a 2” aluminum pipe. You can not bead roll it completely. It is just a limitation of manufacturing.
We have tested it over and over and there are zero issues with it. Every stg3 aluminum outlet we have ever produced is not completely bead rolled and there have been zero failures or leaks.
Sent from my iPhone"
"Hello,
I apologize for the delay as I didn’t see your first email.
In reference to your picture. The part is not damaged or improperly QC’d.
That is a 135 degree 1D bend on a 2” aluminum pipe. You can not bead roll it completely. It is just a limitation of manufacturing.
We have tested it over and over and there are zero issues with it. Every stg3 aluminum outlet we have ever produced is not completely bead rolled and there have been zero failures or leaks.
Sent from my iPhone"
Awesome - glad to see other people are having success with this combo and this shows the clearance much better than my photo does. Regardless of what others want to say, you wont be disappointed imo.I basically have an identical setup, down to the BL coils. I'd recommend either loosening that wire bracket so you can position the coils more comfortably or removing it all together like I did if having to have things angled one specific way bothers you like it did for me.
