Need some help with subframe/motor mount NM specs.

[buster84]

I need some help if anyone can help. I'm reinstalling my turbos and since I have 2009 x drive awd model i'm having troubling finding NM torque vales for the subframe bolts, motor mount bolts and the right engine support (the part the top of the motor mount connects to)

Any help is greatly apreshiated!

 

[doublespaces]

Have you checked the bentley manual? I know there is one floating around.

 

[buster84]

Have you checked the bentley manual? I know there is one floating around.

I don't own one I never thought about looking for a pdf version I guess I'll have to Scourge around and try to find one.

 

[buster84]

Ok i found this, but im still not able to find what im looking for. Its also hard to tell whats for the xdrive vs rwd. Are you good at reading these?

http://www.georgebelton.com/335i.tech/bentley.php

 

[buster84]

Ok i found what i was looking for. This webite made it so easy to find exactly what i needed, I hope this link helps anyone else in the future looking to torque values.

https://www.newtis.info/tisv2/a/en/

 

[doublespaces]

Ok i found what i was looking for. This webite made it so easy to find exactly what i needed, I hope this link helps anyone else in the future looking to torque values.

https://www.newtis.info/tisv2/a/en/

That information is extracted from Rheingold/ISTA+, do you have that? It is readily downloadable from the internet, you can find a link on Bimmergeek's website.