Hey, wondering if anyone with a n20 tmap sensor on hybrids has had this happen. Doing a few pulls to see if I'm hitting target pretty close to target , but then after a few pulls it wont go past 10psi (this is on 3rd gear pulls). in the log what I noticed was that Wgdc PID and Wgdc base are matched together. I've read on a post on this forum someone said it means wgdc timed out due to not hitting target, kind of stumped also I do get a 30ff shadow code. If I pull over and turn the car off seems like it goes back to working and then the same thing happens all over. any help/suggestion would be appreciated
thanks !
thanks !