JB4 BEF (custom tune) end this please

[Sixbanger]

I've been encountering flatlining since I had to fix some wires on the JB4. All the wires are installed correctly, however I've been getting flatling when I try and get on it. Tuner is oblivious and can't help me. This is gettin really frustrating.

 

[all4bspinnin]

This log only went to 3500 rpm. When you say flat lining, what are you referring to? Its a little late and i took a quick glance at the logs.

 

[Jake@MHD]

Tuner is oblivious and can't help me.

Time for a new tuner?

 

[N54QC]

Definitely need a new log from 2k to redline. Not seeing the issue in the log you posted.

 

[Twisted Tuning]

I've been encountering flatlining since I had to fix some wires on the JB4. All the wires are installed correctly, however I've been getting flatling when I try and get on it. Tuner is oblivious and can't help me. This is gettin really frustrating.

log doesn't show any flatlining.

Definitely need a new log from 2k to redline. Not seeing the issue in the log you posted.

no need to start logs at 2000rpms. thats how bent rods happen. 2800rpm or so start is fine.

 

[all4bspinnin]

Twisted is right. I dont start any logs less than 2600ish. I only want to see a snap of when spoolmode ends.

 

[Sixbanger]

log doesn't show any flatlining.



no need to start logs at 2000rpms. thats how bent rods happen. 2800rpm or so start is fine.

28000 the lowest. I usually just do 2500 just for a log, but I dont log all of the time plus the issue happens just after2400 rpms. Injector 4 failed, car is working properly now.