I have had nightmare trying to install vtt and vrsf outlets to hydra turbos . Apparently the only outlets supposedly able to fit are mmp silicone and they aren't ideal size and may have clearance issues plus isnt a gaurantee.
So at this point I had the fabricator from "the shop" in Stratford ct originally Norwalk look Into the situation and to make outlets the way I want, that are the recommended specs from Omar himself with proper merge and so on. At this point he wanted 400 to make them and other people showed Interest so I asked about more and he agreed to make additional for 300 and to do mine for 300 if getting a few made.
They will be thin wall 1.75 inch od as per Omar recommendations with a tight radius bend from front turbo to provide proper clearance. I am having the rear turbo made in two pieces for install ease if anyone wants can be one piece but not sure if that would be wise for install reasons. These will mate perfectly with the snouts on turbos as they are 2 inch od 1.52 Id.
Will need two 1.75 to 2 inch couplers Omar sent me 1 from HPS which I really liked and then one 1.75 inch straight coupler along with a 2.5 inch coupler for your intercooler if you were previously using silicone and then whatever clamps you like best.
I will post pics as soon as I have them should be day or two.
So at this point I had the fabricator from "the shop" in Stratford ct originally Norwalk look Into the situation and to make outlets the way I want, that are the recommended specs from Omar himself with proper merge and so on. At this point he wanted 400 to make them and other people showed Interest so I asked about more and he agreed to make additional for 300 and to do mine for 300 if getting a few made.
They will be thin wall 1.75 inch od as per Omar recommendations with a tight radius bend from front turbo to provide proper clearance. I am having the rear turbo made in two pieces for install ease if anyone wants can be one piece but not sure if that would be wise for install reasons. These will mate perfectly with the snouts on turbos as they are 2 inch od 1.52 Id.
Will need two 1.75 to 2 inch couplers Omar sent me 1 from HPS which I really liked and then one 1.75 inch straight coupler along with a 2.5 inch coupler for your intercooler if you were previously using silicone and then whatever clamps you like best.
I will post pics as soon as I have them should be day or two.