Hello all

[ccfj1]

Hi All,

Been a member for a while, but just been doing a lot of reading.!!

Im from the UK and have a 2010 e92 n55 335i m-sport, it has 25k miles and is in pretty much as new condition (she was a garage queen).

I've had her a few years and have done a few retrofits.

M3 cluster (coded to 335)
M3 heated interior (car had not heated seats)
M3 rear spoiler
M5 illuminated 6 speed gearknob
M4 4 pot Front calipers with 370 performance drilled discs
2 pot performance rear calipers with performance drilled discs
Rear Sunblind
EPS individual Audio (from base)
TV retrofit
DAB retroft
Split armrest
Rear cupholders
AUX media input
Rear Media/usb input for rear passanger
Combox update (internet/connected etc)
GTO and compas rear view mirror

Mechanically she is pretty OEM.

This one is my 7 the bmw I had a e46 m3 before this one and i also did loads of retrofits on that too.

I have a full bench setup, cas,key, jbbr, kombi, cic,cid,zbe,combox, tv and eps amp, plus connections for other modules, i have m3szl and mfsw switch pack comming.

I'm also developing a canbus so i can run the cic without the bench setup.

I'd like to look at extending its use for things like the n-drive button, shiftlights etc.

Looking forward to joining in with some of the forum threads and thanks to Aus335iguy for the invite.

BR//John

I'll post some pics up when i can.

 

[NoGuru]

Welcome. Sounds like a nice setup.

 

[Asbjorn]

Thanks for joining. Sorry for the @aus335iguy situation. We will try to do better from here.

 

[aus335iguy]

Sorry as in "sorry we didnt invite you earlier" or "sorry you had to meet Aus335iguy first"

 

[Asbjorn]

Sorry as in "sorry we didnt invite you earlier" or "sorry you had to meet Aus335iguy first"

Yes

 

[doublespaces]

25k, wow!

So what exactly are you doing with this bench setup, writing custom software?

 

[ccfj1]

HAHAHAH thanks guys, its a real plesure to be here...

 

[ccfj1]

25k, wow!

It was 15K when i bought her!!

So what exactly are you doing with this bench setup, writing custom software?

Mostly flashing updates and messing about, i can do full cic updated (firmware and fsc loading etc), i can pretty ,uch flash any module.

I'm doing a lot of coding tbh, I'm also coding ardunio nano with a can bus sheild looking at m-drive emulation etc.

I'd love to have a look at the QNX firmware too, maybe change the splash, that would be cool.