Anyone got experience with supertech 4032 forged pistons for a mild build ? Not shooting for the moon
Forged pistons
- Thread starter Ecosse_b58
- Start date
4032 has more silica and expands less than 2016 alloy pistons allowing you to run a bit tighter tolerances/clearences fwiw
Yeh I’m building my car mostly for street so was more drawn to 4032 for this reason.
But cant find much information on the pistons Iv found which are supertech. Supposedly they are rebranded iasa pistons from Argentina. I see p2uned use them in some of their a90 supra builds but not found anymore than that. If you Google it’s mostly Miata turbo guys using them or sr20det guys. Some say they are rated at 150hp per cylinder others say 200hp per cylinder.
I think any forged piston is superior over cast if the tune is correct.
My build will be completed shortly ones engine is built and will consist of;
2017 M140i
Westwood cylinder liners.
Supertech rods and pistons.
Walton g35 turbo kit.
Precision raceworks 750cc pi.
Walbro 525 secondary pump.
Reflex+
Not a lot of b58 information so thought I would ask the n54 crowd
But cant find much information on the pistons Iv found which are supertech. Supposedly they are rebranded iasa pistons from Argentina. I see p2uned use them in some of their a90 supra builds but not found anymore than that. If you Google it’s mostly Miata turbo guys using them or sr20det guys. Some say they are rated at 150hp per cylinder others say 200hp per cylinder.
I think any forged piston is superior over cast if the tune is correct.
My build will be completed shortly ones engine is built and will consist of;
2017 M140i
Westwood cylinder liners.
Supertech rods and pistons.
Walton g35 turbo kit.
Precision raceworks 750cc pi.
Walbro 525 secondary pump.
Reflex+
Not a lot of b58 information so thought I would ask the n54 crowd
You mean you don't want to pay 1.8k for these: https://www.e90post.com/forums/showthread.php?t=1999212
I kidd.
2300 for pistons MSRP...ouch!
I only mention this as you posted in the N54 section.
There should be reliable 'budget' forged pistons for every engine.
I kidd.
2300 for pistons MSRP...ouch!
I only mention this as you posted in the N54 section.
There should be reliable 'budget' forged pistons for every engine.
Last edited:
