E9X Auto trans cooler kit

[Tippin]

So as some of you already know Omar has been making some fittings for auto / DCT cars but it seems quite a few people still need a full kit. My girls 335i Just went through a major overhaul and ADE's bad ass FMIC with the full 3in outlet does not fit with the AT cooler. So with a huge amount of help from Local mechanic we were able to build a complete kit utilizing a Mishimoto oil thermostat and Setrab oil cooler. If anyone is interested in this please let me know so i can start gathering interest and get some pricing ready for you guys.

JUST TO CLARIFY THE BLUE LINE WAS ONLY FOR BUILDING THE KIT AND TESTING DIFFERENT LOCATIONS. THIS IS NOT THE FINAL PRODUCT (flame suit off)

 

[crowdedthehouse]

Interested, price pending.

 

[Blaster400]

Definitely interested!

 

[cityazndan]

Yes, what's the price?

 

[MiamiM3]

Definitely interested. Depends on price.

 

[JBacon335]

I'm interested

 

[klooney]

Interested depending on price

 

[Andy]

Interested if the pricing is right.
We need one of these kits for our AT's..

 

[Tippin]

So just to give you guys an update I have been doing some testing with the kit. So far everything is pretty damn good! In 95 degree az heat I can let the car sit for 15 minutes running or drive in stop and go traffic but only see a max of around 185 degree trans temps. I have seen 189 once for 1 minute while sitting idle with the car on. Once moving the car went back down to 185 within a minute. Freeway driving is almost a joke. 170 degree trans temps in 95 degree weather after 20 minutes on the freeway and no increase in temps with back to back pulls..... i lied maybe a 1 degree variance

In regards to pricing. I am shooting for less than 700, MAYBE less! The main hold up on pricing is due to the fact my mechanic / the guy who laid this kit out for us ( lets take a moment to bow our heads) recommends hard lines because of the the pressure and heat. If we can pull off hard lines this will save a considerable amount of money / time. So lets keep our finger crossed.

 

[COTT3series]

Interested, price pending.

This^

 

[Cjdzombie]

My Trans would like a cool down.

 

[Jrmy335i]

very interested!!! Update us on price for full kit!

 

[Tippin]

Should have pricing next week. I do not have the time to make these kits so I will be working with a local shop to get them out to you guys. We are hoping to have pricing next week.