DocRace N55 dynos 626whp / 531 wtq

[doublespaces]

Daniel Foley's @Dfoley092 2013 F30 N55 has a @DOC_Race top mount kit on it and managed 626.70 whp and 531.91 wtq @ 26psi

Here is the mod list according to @Midnite Tuning

Doc race top mount kit first one on production actually
6266 precision
Tial wastegates and bov
Fuel it port injection 550cc injectors
Midnite tuning custom
dual walbro 450 low presure fuel pump
Evolution racewerks intercooler and challenge charge pipe
Jb4 with bms port injection controller
Build and tuned by midnite tuning inc

 

[Streetz65]

I shoulda kept my F30 and waited for a single kit like this to come out

 

[luchocamp]

300hp at 4,000rpm ... imagine very low torque map on porpurse because those 6266 on a 3.0L should be more efficient than that ? is this flat target boost 26psi ? any logs ?

 

[Tony@VargasTurboTech]

HOLY LAG BATMAN!

 

[Mterkait]

300hp at 4,000rpm ... imagine very low torque map on porpurse because those 6266 on a 3.0L should be more efficient than that ? is this flat target boost 26psi ? any logs ?

definitly something wrong with that spool. even without tune shouldn't be that bad right?

 

[doublespaces]

I think this is a work in progress

 

[Midnite Tuning]

We still working on this car, dan order some stuff that we are needing we would have more results after the holidays. This was just a update.

 

[Tony@VargasTurboTech]

I think this is a work in progress

This confuses me? A work in progress? What is being changed in the tune? When we tested our N55 it, we just threw a generic tune in it, and it spooled fine. So either you have a large boost leak, or something else is going on there.

 

[colo_evo]

Why can't BMW owners take photos of dyno graphs? Lol

Check for the fire rings in the wastegstes, that'll cause lazy spool.

 

[Tony@VargasTurboTech]

Its only bad graphs that get bad pictures. Fact

 

[colo_evo]

Its only bad graphs that get bad pictures. Fact

Haha! So true.

 

[Midnite Tuning]

Here is a full graph sorry about the picture before ,hope nobody lost sleep because of it on this one 663whp and 579tq

 

[Mterkait]

Here is a full graph sorry about the picture before ,hope nobody lost sleep because of it on this one 663whp and 579tq

Nice job, Time to improve torque pre-4000rpm, I have same issue; still working on it with Justin.
490whp/462wtq 6th gear run, def ran into some sort of issue (probably a limiter or something)
500whp/410wtq 5th gear run, ran fine and smooth.
all runs was between 20-21psi on 93octane only, no meth.

for comparsion M3 with VF flash got around 520whp/500wtq on this dyno.

 

[doublespaces]

Nice job, Time to improve torque pre-4000rpm, I have same issue; still working on it with Justin.
490whp/462wtq 6th gear run, def ran into some sort of issue (probably a limiter or something)
500whp/410wtq 5th gear run, ran fine and smooth.
all runs was between 20-21psi on 93octane only, no meth.

for comparsion M3 with VF flash got around 520whp/500wtq on this dyno.
View attachment 8966

Are you also running a 6266?

 

[Mterkait]

Are you also running a 6266?

Yes.