Coding tips tricks and advice

PUTC

Corporal
Oct 14, 2017
206
68
0
Ride
08 335xi
I finally got my laptop and as going to try to do some coding in the next few weeks. First I’d like to do the Alpina mod than move on to adjusting some of the nannies. There are enough videos on you tube for that to go off of. What has a everyone else have going on and who has some tips to give out. Would like this thread to expand on some coding knowledge and experience using winKPF/Ediabas. I’ve downloaded it off of bimmer geeks.net and have most of it set up so far. Has anyone else used them to get the software? Is it complete? I think I still need to download the Daten file for my chassis but not sure. I’ve gotten to the point where I’ve installed and moved some files around, hooked up cable and have drivers installed. Went into advanced settings and adjusted parameters. What is everyone else’s thoughts on what tranny coding to do. I am an xi also. Thanks guys/gals
 
  • Like
Reactions: Jeffman

doublespaces

Administrator
Oct 18, 2016
9,303
4,331
0
AZ
Ride
2009 E93 335i
I have rheingold, but its incomplete because my wds is broken. Bimmergeeks has their new dongle coming out as well as some coding tricks baked in, it may do some of the things you're wanting.
 

doublespaces

Administrator
Oct 18, 2016
9,303
4,331
0
AZ
Ride
2009 E93 335i
Rheingold is also known as ISTA which comes in two types, ISTA+P and ISTA+D

D is a diagnostic software. Everyone should have this in my opinion. P is a programming/coding software like INPA. However its much more complicated to install.
 
  • Agree
  • Informative
Reactions: MacBB55 and Jeffman

Jeffman

Major
Jan 7, 2017
1,618
1
628
0
so in my case, I have a 04 525i would ISTA+D be useful to me in anyway or should I just stick with inpa and ediabas?

I took @doublespaces advice and installed Rheingold ISTA/D to be able to diagnose problems. It took me close to 4 hours to download, unpack, install etc. all of the components. There’s a really good YouTube video that shows you step by step:
I’ve used INPA on and off for about four years now. Although I have barely scratched the surface of ISTA/D I can see that INPA is 1980’s technology compared to Rheingold 2000’s technology.
 

MacBB55

Specialist
Jul 22, 2018
80
6
0
Northern California
Ride
2004 BMW 525I
awesome thanks, I think I am going to try ista/d for now as I learn everything else just so I can make sure im not throwing any codes the normal obd2 would have missed, with this software can you do the software update as well as tranny reset? im not 100percent sure im going to do either but just in case, also is it able to monitor sensors and things like inpa/ediabis?
sorry like I said I am a complete noob when it comes to all of this but I am very interested in my car
 

Jeffman

Major
Jan 7, 2017
1,618
1
628
0
ISTA/D is only for diagnosing problems. This should monitor sensors, turn on/off things etc.
I think you’ll need ISTA/P to do any programming or coding. I haven’t tried that.
 

NoQuarter

Major
Nov 24, 2017
1,662
1,066
0
Indiana, USA
Ride
Z4 35is, 535xi, X5 35i
On my 535 I am not able to use much of ISTA/D. I have retrofitted the Idrive knob/controller and SAT transmission shifter and I have an Instrument cluster from an M6.

Once ISTA identifies these I can't do anything diagnosis wise until I replace them it seems.
 

Jeffman

Major
Jan 7, 2017
1,618
1
628
0
On my 535 I am not able to use much of ISTA/D. I have retrofitted the Idrive knob/controller and SAT transmission shifter and I have an Instrument cluster from an M6.

Once ISTA identifies these I can't do anything diagnosis wise until I replace them it seems.
Bummer!
I just have MHD and xHP flashed as major DME/TCU changes, along with some simple things coded like V= speedometer, fogs independent of high beams, etc. I was able to connect my ISTA/D. I haven’t checked if I can diagnose anything in my transmission with it. I guess we shall see.
 

MacBB55

Specialist
Jul 22, 2018
80
6
0
Northern California
Ride
2004 BMW 525I
ok thanks again, will having both inpa as well as istp-d on the same labtop cause any software problems? im thinking I will use ista to read any codes or past codes in the meantime while im learning to use inpa, ediabas, winfk and I know im forgetting at least one lol
 

Jeffman

Major
Jan 7, 2017
1,618
1
628
0
I don’t believe there is a problem having them both on the same laptop. Maybe the YouTube video cautioned against having both applications open at the same time?
 

MacBB55

Specialist
Jul 22, 2018
80
6
0
Northern California
Ride
2004 BMW 525I
yea I wouldn't have them open at the same time, I could probably get away with leaving inpa as a zipped file an use the other for the codes and such while I learn inpa, ect.. I want to know as much as I can before I hook my car up to anything that I can accidently mess it up not quite knowing what I am doing. I don't think there are many things I can really code/program for my car since it is only a 2004 an early, we're talking 01/04 early lol) I will only be able to code, atm, hopefully the digital speedo, I think ill need to do a new battery sooner than later, it would be cool to do folding mirriors but from what I understand my car is a lil to early for that. I would like to look into updating the software, maybe adding navigation or at least replacing the aux plug in the glove box with a usb plug in, but I cant think of anything other than that but Im sure I will come across more I try to read anything that looks like it maybe relevant.
 

langsbr

Captain
Apr 5, 2017
1,266
771
0
Ride
07 335i 6MT e90
What kind of coding does INSTA+P do that NCSExpert doesn't? All of the coding that I've done has been in NCSExpert.
 

MacBB55

Specialist
Jul 22, 2018
80
6
0
Northern California
Ride
2004 BMW 525I
im not to sure about that, if I was to take a guess I would say it is probably pretty much the same when it comes to what coding you can or cant do to your car, I would think maybe the only difference would be what model cars one or the other could code. this is just a guess tho so don't take my word for it im still very much in the learning curve when it comes to this subject.
 

MacBB55

Specialist
Jul 22, 2018
80
6
0
Northern California
Ride
2004 BMW 525I
**Update**
well I managed to get my cable & car to connect, finally lol, it took a bit of reading but I was able to get the software working to, so far the only thing I have done with inpa is read my error codes, well past because I have no current codes being thrown at all, I was able to find a list of the module ackranims but I haven't been able to find a sit or file that will help me to decode the codes that have been thrown, does anyone know a decent one? Also if anyone knows a good how to when it comes to inpa, ediabas, winfpk, and whatever other program that comes with standard tools so I can learn how to do more than just check my codes lol
 

MacBB55

Specialist
Jul 22, 2018
80
6
0
Northern California
Ride
2004 BMW 525I
what exactly is pro tools lol

*****OOOPPPSS
maybe I should have checked the link before asking lol, im thinking about either getting this or just using inpa on my surface since it would be easier than taking my laptop for a dirve in the car.
 
Last edited:
  • Agree
Reactions: Jeffman