Brembo Bbk

Venom77

Private
Feb 22, 2017
36
27
0
Arizona
Ride
335I
Selling my Brembo bbk off my 335I. 6 Piston front with 4 piston rears. 380mm front rotors and 345mm rears.
I have done one track day on these rotors. Has 50% hawk hp+ pads with it. Looking for 3k shipped obo.



Car is parked till I get a new engine so there wont be anymore miles put on them.

Here is two links to where they were purchased.

https://www.racetechnologies.com/pro...0?vehicle=7555

https://www.racetechnologies.com/pro...0?vehicle=7555

Thanks.
 

Bmwfixerguy1

Lieutenant
Jun 5, 2017
873
288
0
Ride
07 335i MT
Only because we are all trying to learn more about engine failures. Could you elaborate more on the failure. Doant have to be in this post I can understand not wanting to clog it up
 

Venom77

Private
Feb 22, 2017
36
27
0
Arizona
Ride
335I
Only because we are all trying to learn more about engine failures. Could you elaborate more on the failure. Doesn't have to be in this post I can understand not wanting to clog it up

No problem. I came to realize my 10 year old intercooler wasn't doing a good job the hard way. I took my car to a Nfz here in AZ this past Sunday and my Iats hit 200 by the end of the pull. My car pulled all timing which probably increased the heat in the cylinders even more. Cyl 3 cracked a ring.
 

Bmwfixerguy1

Lieutenant
Jun 5, 2017
873
288
0
Ride
07 335i MT
No problem. I came to realize my 10 year old intercooler wasn't doing a good job the hard way. I took my car to a Nfz here in AZ this past Sunday and my Iats hit 200 by the end of the pull. My car pulled all timing which probably increased the heat in the cylinders even more. Cyl 3 cracked a ring.
Ah I read that on FB. Sorry to hear buddy! Hope you get back together ASAP
 

silverstreak18

Corporal
Jan 3, 2018
126
65
0
Charlotte, NC
Ride
2016 M3
FWIW I would take the wheels off and do a quick detail on the calipers for better pics. You would be amazed at how much of a difference that would make to most potential buyers. GLWS