Hey guys,
Been troubleshooting AFR's not tracking properly on my Speedtech kit. Currently on 91 octane. Would appreciate some feedback and which direction I should head when it comes to 02 sensors. Currently running stock 02's (brand new) and secondary 02's are disabled (in an attempt to help with the issue, previous logs with secondary 02's enabled show the same issue).
Mods:
JB4 + MHD
PFS POD hpfp
PFS stage 3 lpfp
NGK 1 step colder (.022 gap)
VRSF 7" fmic
10lb wg spring
no meth
no pi
stock 02 sensors
secondary 02s disabled
Been troubleshooting AFR's not tracking properly on my Speedtech kit. Currently on 91 octane. Would appreciate some feedback and which direction I should head when it comes to 02 sensors. Currently running stock 02's (brand new) and secondary 02's are disabled (in an attempt to help with the issue, previous logs with secondary 02's enabled show the same issue).
Mods:
JB4 + MHD
PFS POD hpfp
PFS stage 3 lpfp
NGK 1 step colder (.022 gap)
VRSF 7" fmic
10lb wg spring
no meth
no pi
stock 02 sensors
secondary 02s disabled
Additional information
-
Firmware Interface Engine TMAP_V AvgIgn DWP MethTriggerMode FF MethSafeMode MethAdd MethScale MethPSI E85_Setup VFF_Offset fuel_30 fuel_35 fuel_40 fuel_45 fuel_50 fuel_55 fuel_60 fuel_65 fuel_70
30/139//2 JB4 iOS 9432 E Series - N54 2.0 20.5 74 0 44 3 20 99 0.0 0 132 20 20 20 20 20 20 20 20 20
BoostSafety PID Gain AutoShiftRed Fuel_OL FUA 1st_limiter 2nd_limiter 3rd_limiter Options N20_TMAP 6CylMode LastSafety duty_15 duty_20 duty_25 duty_30 duty_35 duty_40 duty_45 duty_50 duty_55 duty_60 duty_65 duty_70
21.0 10 0 40 0 0.0 0.0 0.0 160 1 8 4 50 50 50 50 50 50 50 50 50 50 50 50
